Hyundai HI4 operation manual 8 R44 Conveyor Data Clear

7. R code

------------------------------------------------------------------------------------------------

7.8 (8) R44 CONVEYOR DATA CLEAR

Outline

It clears Conveyor data ; CP, CR, CS.

The content which will be cleared can be different according to the selected mode at "Cond Set"[PF5] -> "Applicnd"[PF1] -> 1: Conveyor oper = <Normal, Simulat, Test> as table.

	General	Simulation	Test
CP(Pulse)	CLEAR	Keep present	CLEAR
		pulse
CR(Distance)	CLEAR	CLEAR	CLEAR
CS(Speed)	CLEAR	CLEAR	Always '0'

It is the same function with 2.Conveyor data reset of "Service"[PF1] -> 2.Register ->

6.Conveyor Data.

Screen display

Conveyor data clear. Continue? [YES/NO]

>

Service System Rel.WAIT Cond Set

„If you select [YES], the conveyor data shall be cleared. Otherwise, If you select [NO], this function shall be cancelled.

Reference

⑴It cannot be executed during operation.

⑵The limit switch input state will be cleared, too. So, to start pulse counting, it needs new limit switch input.

----------------------------------------------------------------------------------------

7 - 13