Hyundai HI4 operation manual External error output, 143938 *** Error output *** A0 S4

6. System setting

------------------------------------------------------------------------------------------------

6.2.8 External error output

Outline

This is the function that outputs the detected error no. to the external device.

Screen display

14:39:38 *** Error output *** A:0 S:4

Serial output =<Disable,Port1,Port2>

Discrete output = <Disable,8bit,16bit>

Press [SHIFT]+[<-][->]

>

„The serial output outputs ASCII code to the external device using serial

interface(RS232C).
Output type are
First byte	:	“ $”
2nd∼6th byte	:	“ ERROR”
7th byte	:	“ ” (Blank)
8th∼11th byte	:	error number
12th byte	:	CR
13th byte	:	LF
For example
In case of error 0101( E0101 )

$ E R R O R 0 1 0 1 CR LF

└ ─ ┴ ─ ┴ ─ ┴ ─ ┴ ─ ┴ ─ ┴ ─ ┴ ─ ┴ ─ ┴ ─ ┴ ─ ┴ ─ ┴ ─ ┴

1 2 3 4 5 6 7 8 9 10 11 12 13

„First number designation output outputs the error number to the external device through the O signal assigned in the “ SYSTEM” [PF2] → 2. CONTROL PARAMETER → 1. IN/OUT SIGNAL SETTING → 6: OUTPUT SIGNAL ASSIGNMENT.

----------------------------------------------------------------------------------------

6 - 39