Hyundai HI4 Welding Start Condition EXE. AT ASF#=x, 143938** Arc Condition File **A0 S4, Save

9. Quick Open Function

------------------------------------------------------------------------------------------------

9.3 WELDING START CONDITION - EXE. AT ASF#=x

Outline

If you press key, when a cursor is at the ARCON ASF#= instruction line, the edit screen appears as followings.

Entry screen

14:39:38** Arc Condition File **A:0 S:4

ARC START	CONDITION FILE								1/2
Cond No	: [		1	] (chg:[Sft]+[Up/Down])
Comment	: [Arc Start						Cond 1		]
Vol Confirm: <			Done		, Not		Done>
Retry	: <		OK	,No>
Retry Mode	: <Reenter,Shift,							Weld Path		>
Current	:	[200] A
Voltage	:	[ 20.0] V
WCR Wait	:	<Disable,				Enbale		>
Wait Time	:	[0.10] sec
Gas Preflow:		[ 0.5] sec					(if GasControl)

----------------------------------------

<Initial Condition (Disable:0sec)> 2/2

Initial Time		: [0.00]		sec
Initial Current		: [	0] A
Initial Voltage		: [	0.0] V
Output method		: <	constant		,Slope>
Select and Enter number. Press [SET]
>
Aux Cond	Welder	Previous		Next		Save

screen contents

„con. No. : It assigns the welding con. No. (32 conditions are available.)

„explanation : It records the explanation about usage of the welding condition.

„voltage check : It sets whether the checked control method of welding power machine is unification or individuation.

„retry : In case of not detecting WCR signal after outputting ARCON signal, it determines whether using retry function or not.

„action mode : It is the moving direction of torch when it retries.

①re-entry : In case that arc occurrence is failed, after moving back to before step, it tries to make an arc occurrence again. The moving distance can be set as retract distance on the welding auxiliary condition retry screen. Because it steps moving

----------------------------------------------------------------------------------------

9 - 5