Philips DVP620VR Audio Language DVD-V, Stereo Sound Mode, Subtitle Language DVD-V, Camera Angle

PARENTAL LEVEL ALL

H9723AD(EN).qx3 04.6.25 3:28 PM Page 16

Playing a Disc

Audio Language DVD-V

The DVD/VCR allows you to select a language during DVD disc (if multi language available) playback.

1Press AUDIO during playback.

2Press AUDIO repeatedly to select your desired language.

Notes:

-If your language is not shown after pressing AUDIO several times, the disc may not have that language. However, some discs allow you to change audio language or subtitle language setting in the disc menu. (Operation varies depending on the disc, so refer to the manual included in the disc.)

-If you choose a Language that has a 3-letter language code, the code will be displayed every time you change the Audio language setting. If you choose any other languages, ‘---’ will be displayed instead. (Refer to the language code list on page 19.)

Stereo Sound Mode CD VCD

1Press AUDIO repeatedly during playback to select between “STEREO”,“L-CH” or “R-CH”.

STEREO - both right and left channels are active (stereo) L-CH - only left channel is active

R-CH - only right channel is active

Note:

-If the Virtual Surround setting is “ON”, the sound mode will be fixed to “STEREO”, and can not be changed.

Subtitle Language DVD-V

The DVD/VCR allows you to select a language for subtitle during DVD disc (if available) playback.

1Press DVD, then SUBTITLE during playback.

2Press SUBTITLE repeatedly to select your desired subtitle language.

•The selected language will be displayed on the display bar at the top of the screen.

3To turn off subtitles, press SUBTITLE repeatedly until “OFF” appears.

Notes:

-If your language is not shown after pressing SUBTITLE several times, the disc may not have that language. However, some discs allow you to change audio language or subtitle language setting in the disc menu. (Operation varies depending on the disc, so refer to the manual included in the disc.)

-If you choose a Language that has a 3-letter language code, the code will be displayed every time you change the Audio language setting. If you choose any other languages, ‘---’ will be displayed instead. (Refer to the language code list on page 19.)

Camera Angle DVD-V

Some DVD discs contain scenes which have been shot simultaneously from various angles.You can change the camera

angle when the mark ( ) appears on the screen.

If the “ANGLE ICON” setting is “OFF” in the Display setting,

the icon ( ) will not appear. (Refer to Display Setting.)

1Press DVD, then ANGLE during playback.

•The selected angle will be displayed on the display bar at the top of the screen.

2Press ANGLE repeatedly to select your desired angle.

Parental Control DVD-V

Parental Control limits the DVD viewing that exceeds your settings.The password is required to change the “PARENTAL LEVEL”.

This feature prevents your children from viewing inappropriate materials.

1Press SETUP in stop mode.

2Press s or B to select “CUSTOM”, then press OK.

• CUSTOM mode screen will appear.

3 Press s or B to select “PARENTAL”, then press OK.

4 Press the numerical key pads to enter PARENTAL

your 4-digit password.

•When doing this for the first time,

enter any 4-digit number by pressing the numerical key pads (except for 4737), then press OK.That number will be used as the password from the second time onward. Record your password in case you forget it.

•If you forget the password, press 4, 7, 3, 7.The original password will be cleared and parental levels will be set to “ALL”. Enter a new 4-digit password, then press OK.

5Press K or L to select “PARENTAL LEVEL”, then press OK.

6Press K or L to select the desired level, then press OK. For details, see below.

7Press SETUP to exit.

PARENTAL LEVEL

“ALL”	:All parental locks are cancelled.
“8”	: DVD softwares of any grades (adult/general/
	children) can be played back.

“7 to 2” : Only DVD softwares intended for general use and

	children can be played back.
“1”	: Only DVD softwares intended for children can be
	played back.

Note:

-This function may not work on some DVDs. Make sure if the parental lock function operates in the way you have set.

To Change the Password

1Follow the steps 1 to 4 above.

2Press K or L to select “CHANGE”, then press OK.

3Enter a new 4-digit password, then press OK.

4Press SETUP to exit.

Marker Setup Screen DVD-V CD VCD

Use markers to memorise your favourite places on a disc.

1During playback, press SEARCH MODE repeatedly until the Marker Setup screen appears on the TV screen.

2Press s or B to select 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10 and ensure that “- - - - : - - : - -” appears in the display.

3When you reach the desired point, press OK.

•The Title or Track and elapsed time will appear on the TV screen.

4To return to a marker later, press SEARCH MODE repeatedly until the Marker Setup screen appears and s or B to choose the desired marker, then press OK.

Notes:

-Opening the disc tray, turning off the power or selecting “AC” at step 2 and press OK will erase all markers.

-To clear a marker, using s or B, position the cursor on to the marker number to be cleared and press CLEAR/C-

RESET.

-You can mark up to 10 points.

5Press SEARCH MODE or RETURN to exit.

16