Toshiba GA-1031 manual Setup for the Peer-to-Peer Type Network, For Windows, For Macintosh

Setup for the Peer-to-Peer Type Network

Instructions for set-up on a Peer-To-Peer TCP/IP, IPX/SPX, and the AppleTalk (Ethernet)

Network.

For Windows

	TCP/IP	IPX/SPX
Control Panel	Assign the IP address, Subnet Mask, and	• Assign the IP address, Subnet Mask, and
Setup	Gateway address. (See “NETWORK SETUP	Gateway address. (See “NETWORK SETUP -
	- ASSIGNING IP ADDRESS”.)	ASSIGNING IP ADDRESS”.)
		• Configure the Novell Settings. (See
		“NETWORK SETUP - NOVELL SETTINGS”)
Install the	Install the Peer-To-Peer Utility for TCP/IP.	Install the Peer-To-Peer Utility for IPX/SPX.
Peer-to-Peer	(See “USING WITH PEER-TO-PEER UTILITY	(See “USING WITH PEER-TO-PEER UTILITY
Utility	- Peer-to-Peer Utility for TCP/IP Setup”.)	- Peer-to-Peer Utility for IPX/SPX Setup”.)
Install the	Install the appropriate Printer Driver for the	Install the appropriate Printer Driver for the
Printer Driver	Operating System used and configure options.	Operating System used and configure options.
	(See “INSTALLING THE PRINTER DRIVER for	(See “INSTALLING THE PRINTER DRIVER for
	Windows”.)	Windows”.)

For Macintosh

Control Panel Setup	• Assign the IP address, Subnet Mask, and Gateway address.		(See
	“ASSIGNING IP ADDRESS”.)
	• Enable the AppleTalk. (See “NETWORK SETUP - APPLETALK
	SETTING”)
Install Printer Driver	Copy the PPD file and select the printer.	(See “INSTALLING THE
	PRINTER DRIVER for Macintosh” .)
AppleTalk Setup	Setup AppleTalk using MAP. (See “MAP - AppleTalk Setup”.)
Printer Specific Options Setup	Configure the Printer Specific Options.	(See “INSTALLING	THE
	PRINTER DRIVER for Macintosh - Printer Specific Options”.)

12