Toshiba GA-1031 manual 147, Printer Specific Options ➀ Offset Stack, ➁ Toner Saving

Printer Specific Options

The Print screen is shown when [Print] is selected from the [File] menu.

Customizing the settings in the Print screen allows enlarged/reduced printing, layout printing, and so on. This section describes “Printer Specific Options”, specific to the e-STUDIO16/20/25.

SUPPLEMENT:

The other settings of the driver should be performed in the LaserWriter setup. For further information on settings, please see the Macintosh manual or Help.

Printer Specific Options 1

➀Offset Stack

Select On or Off to use the Offset Stack function for printing.

➁Toner Saving

Select On or Off to use the Toner Saving function for printing.

➂Paper Destination

Select the destination of the output.

●Standard Output Tray

As a default setting, this is selected. The printed paper is ejected into the general output tray.

●Job Separator Upper Tray

The printed paper is ejected on to the Upper Tray of the Job Separator. This is available only when the Job Separator is installed.

●Job Separator Lower Tray

The printed paper is ejected on to the Lower Tray of the Job Separator. This is available only when the Job Separator is installed.

●Finisher Tray1

The printed paper is ejected on to the Upper Tray of the Finisher. This is available only when the Finisher is installed.

●Finisher Tray2

The printed paper is ejected on to the Lower Tray of the Finisher. This is available only when the Finisher is installed.

for Macintosh PRINTER DRIVER INSTALLING THE

147