Toshiba GA-1031 manual Select Raw or LPR under Protocol

12 Select “Raw” or “LPR” under “Protocol”.

●Raw: The default data type for clients other than Windows 2000. When printing in the Raw type, the entire process of preparing the print job is done on the client computer.

●LPR: Printing is done through the LPD service. When printing in the LPR type, the process of preparing the print job is done on the print server.

●When “Raw” is selected, go to Step 13.

●When “LPR” is selected, go to Step 14.

13

14

Enter “10001” at “Port Number” and

check on “SNMP Status Enabled”.

●“public” is automatically entered for the “Community Name”, and “1” is entered at the “SNMP Device Index”. Do not change them.

●Go to Step 15.

Enter “PORT1” for the “Queue Name”

and check on “SNMP Status

Enabled”.

●“public” is automatically entered for the “Community Name”, and “1” is entered at the “SNMP Device Index”. Do not change them.

98