Manuals / Toshiba / Computer Equipment / Printer

Toshiba GA-1031 manual Assign the IP Address Manually, Display returns to the TCP/IP menu

Models: GA-1031

1 252

Download 252 pages 21.53 Kb

Page 19

Image 19

Assign the IP Address Manually

1 Press + on the Dial Keypad to select IP ADDRESS.

2	Enter the IP Address using the Dial
	Keypad.

3 Press .

●The display returns to the TCP/IP menu.

TCP/IP

01.BOOTP/DHCP

02.IP ADDRESS 03.SUBNET MASK

IP ADDRESS

000.000.000.000

IP ADDRESS

172.016.110.115

IP ADDRESS

ASSIGNING

SUPPLEMENT:

When you want to assign the Subnet Mask and Gateway address, continue the operation after the display returns to the TCP/IP menu. The set-up is the same as the IP address.

●To assign the Subnet Mask, press + to select SUBNET MASK.

●To assign the Gateway address, press + to select DEFAULT GATEWAY.

Press .

●The display returns to the NETWORK menu.

Press + on the Dial Keypad

to select COMPLETE.

●If you want to cancel the TCP/IP setting, press

TCP/IP

01.BOOTP/DHCP

02.IP ADDRESS 03.SUBNET MASK

NETWORK

01.COMPLETE

02.TCP/IP

03.NETWARE

Page 19

Image 19

Toshiba GA-1031 manual Assign the IP Address Manually, Display returns to the TCP/IP menu

Contents

Page FCC Notice Page Table of Contents Setup the Print Server with Windows NT4.0/2000 109 Installing the Printer Driver for WindowsReset a Printer and NIC 176 Print a Test 177 Troubleshooting Introduction Hardware RequirementsNetwork Requirements Others Example of connection on a peer-to-peer type network Example of connection on a client-server type networkSetup for Client Server Network for Windows Setup FlowFor Windows Setup for the Peer-to-Peer Type NetworkFor Macintosh Network Setup Supplement Assigning the IP AddressUse Dhcp Server Assigning the IP Address from the Control PanelStandby Mode, press Key Press Network setting is executingPress + on the Dial Keypad to select Complete Display returns to the TCP/IP menu Assign the IP Address ManuallyNetwork setting is executing Assigning the IP Address using MAP Click on your printer unit Click on Setup TCP/IPCheck off IP Address in Nvram Check on Enable TCP/IP and enter IP AddressComplete the IP Address setting Press On the Dial Keypad To select the Frame Type Novell SettingsPress to select Press the numeric key of the desiredFrame type on the Dial Keypad Press To select AutoNetwork setting is executing Standby Mode, press Appletalk SettingPress + on the Dial Keypad to select Apple Talk If you want to cancel the AppleTalk setting Press Page Using with PEER-TO-PEER Utility For IPX/SPX Protocol PEER-TO-PEER UtilitiesRequired Environment For TCP/IP ProtocolInsertdrive. the CD-ROM into the CD-ROM InstallationClick on Next Installation Notes are displayed Click on Yes Click on IP P2P setupField of Max Hops for, input a Files are installedIs shown. It is the default port Click on NextClick on Find Printers Printers list Next, installing the printer driverClick on Add Printer is added to the AvailableINSTALLINGTHEPEER-TO-PEERUTILITY FORIPX/SPX Click on Next Click on IPX P2P setupAvailable Printers shows S flag Click on Next Files are installedMake sure the printer is displayed Under Available Printers Make sure the printer displayed underInstallation is completed Uninstalling the Peer-to-Peer Utility for TCP/IP Uninstallingthe PEER-TO-PEER UtilityClick on OK Restart the computer Uninstalling the Peer-to-Peer Utility for IPX/SPXClick on OK Click on Yes Setup the Print Server Set-up Example NetWare 3.x SetupSelect File Server Setting up with PconsoleCreating a print queue Creating the print server Print Server Setup Page Assigning a print queue Enter the priority and press the Enter Key Queue is assigned Available Queues appears Select a created queuePrint Server Setup Setting Up Notify Options for the Printer Press the Esc key to return to the menu Primary File ServerPreferred File Servers Available File Servers list is displayedPage Setup the Print Server Nwsrv Setup in NDS ModeStart NetWare Administrator Setting up NetWare AdministratorStarting NetWare Administrator AdministratorPrinter Click on the container object to createClick on Browse of Print Queue Volume indicated by a in the figureCreate Print Queues appears Print Queue NameCreating the printer Assigning the print queue Click on OK Printer is created Details of the created print server Create Print Server windowEnter the name of the print server Under Print Server NameClick on Assignments Allocating the printerPrint server is created Press Alt+F10 to complete the confirmation Setup in Bindery ModeConfirmation before setting up Confirm Bindery ContextORG Starting Pconsole Creating the print server Information menu and press the Enter Choose the created print serverPrint Server Information menu Choose Printer from the Print ServerEnter printer number at Printer No Printer Xxxxx configurationSelect the created printer and press Is the name of the printer createdPress the Esc key four times When Save Changes? appearsWhen Exit? appears, choose Yes and press the Enter key Press the Esc key twiceSelect Print Servers in the Available Option menu When a message appears, press the Enter keyProblems and press Enter key Start the Pconsole utilityPage Setup the Print Server Setup in NDS Mode This is performed on the workstation Creating a print queue Indicated by a in the figure at Click on Browse Print Queue VolumeEnter the name of the print queue Under Print Queue NameCreating the printer Assigning the print queue Click on OK Printer is created Create Print Server window Allocating the printer Supplements Page With Windows NT4.0/2000 Confirming the TCP/IP Print Services Preparation for Setting upCreating a Shared Printer Click on OK Click on Close Verify that the check box for IP address of the printer is addedTo the list of Available ports Add Printer WizardSelect Windows 95 from the list Click on Next Check on Shared\ENGLISH\ESTUDIO\WIN9598\PCL6 Choose Yes or No as necessary, and click on FinishPrinter is created Log on to Windows 2000 as a user With Administrator or Power UserStandard TCP/IP Port at Type When Using the TCP/IP PrintingSelect Local printer Select Create a new port and selectSelect Custom and click on Settings Enter PORT1 for the Queue Name Check on Snmp Status Enabled Enter 10001 at Port Number Check on Snmp Status EnabledSelect Raw or LPR under Protocol Drivers for Windows 2000/XP at Copy Click on OK Click on Next Click on Finish Click on Have Disk100 Printer is created 101102 When Using the IPPClick on OK Click on Have Disk 103 InstalledSelect the printer driver to be Printer is created 104Click on Additional Drivers 105Select the printer driver and select Sharing... from the File menuInsert the printer driver CD-ROM Click on OK 106107 Click on OK Printer drivers are installed108 109 Installing the Printer DriverFeatures of Each Printer Driver Installing the Printer Driver110 111 112 Installation from the CD-ROMInsert the Printer kit CD-ROM into the CD-ROM drive Select the Group Number, and click Click on the appropriate Setup for113 Windows Version114 SelectPaper. the Emulation and DefaultSelect the Peer-to-Peer Port, and click On Next Click on Browse 115Select the network printer and click on OK Enter the printer name, and click on Next 116117 Click on Finish Complete the installationSelect the Program Folder to be Created, and click on Next Windows 95/98/Me Installation by Adding Printer118 Select the network printer and click 119On OK Click on OK Select the printer to be used, and click on Next 120If necessary, change the Printer name, then click on Next 121Select to print a test page or not, then Select how the printer is to be Controlled Click on Start, select Settings, Then click on PrintersWindows NT4.0 122Select the port added in the Peer-to 123Select the printer connected to Server, and click on OKInsert the CD-ROM included with 124Printer kit into the CD-ROM drive 125 126 Windows 2000/XPDouble-click on Add Printer to start Printer Wizard Next to browse for a printer then 127Server, and click on Next Click on Finish 128129 130 Copying the PageMaker PPD file131 Setting the Options ConfigurationClick on OK to save the settings Selectitems. the installed options for each132 After programs have been removed Uninstalling the Printer DriverRun the Uninstall.exe 133134 Install Agfa Font Manager135 Checkinstall. the components you want toClick on OK Click Finish 136137 Uninstall Agfa Font Manager138 Description of ScreenGetting Started with Agfa Font Manager 140 141 For Macintosh142 System RequirementSystem Requirements143 Copying the PPD FileMake sure that Active is selected for AppleTalk Select the Driver144 Click on the Apple menu, and select Chooser145 Option SetupExit the Chooser 146➁ Toner Saving Printer Specific Options147 Printer Specific Options ➀ Offset Stack➅ Edge Smoothing 148➃ Duplex ➄ Media Type149 Printer Specific Options ➇ Resolution150 151 Netpanel Function152 Installing Netpanel153 InstallingClick on a language of your Operating 154 Click on Setup utilities Click on Netpanel setupEnter the IIS virtual directory 155Decide whether to read the Readme file at this time 156157 UninstallingClick on OK 158Required Environments Starting Netpanel159 160 Browsing with NetPanel161 Log➂ Task bar Description of Screen162 ➀ Logo ➁ Topic barOpen the Window and display Help Using Help163 Click on the Help button on Control barLog Printer Discovery Operating FlowFor the Normal User 164165 For the AdministratorPrinter Management 166Group Management NetPanel Setting167 Server ManagementPrinter Discovery Main Printer Discovery168 169 Searching Result Display➀ System Properties ➃ Search Result List 170➁ Connection Properties ➂ Status DiagnosePrinter Management Search Printer Management171 Printer Management Main ➀ Reset Printer172 ➂ NIC Configure ➁ Printer Configure173 ➄ Device Password ➃ Novell Configure174 175 Reset Printer and Test PrintSelect the printer that you want to Reset a Printer and NICClick on Reset Printer Now Operating result is displayed 176Print a Test Clickbar. on Reset Printer on the Task Select desired test177 General Properties Printer Configure178 ➁ Top Priority Cassette ➀ Select Default Input TrayInput Tray Properties 179180 Output Bin Properties➀ Copies ➁ Default Paper SizePaper Properties 181182 Printer Setting Properties➀ Lines Per 183 184 ➈ Emulation Setting➉ Print Postscript Error Device Password185 PCL Font Properties186 Group ManagementProtocols Configuration NIC Configure187 188 IP Configuration➁ Zone Name Apple Talk Configuration189 ➀ Printer Name➁ LPD Banner System Configuration190 ➀ Frame Type➂ Print on Startup 191➃ Type of Startup Novell Configuration Novell Configure192 Device Password Device Password193 ➀ Printers shared in Windows NT Server Server ManagementServer Management Main 194195 Server Management Main Page of Windows NT Server196 Install a Printer to a File Server197 Printer is installed to the FileServer 198 Remove a Printer from a File ServerSelect or specify the printer Click on Continue Printer is removed from the File 199200 Deleting Print Jobs201 Selected print jobs are canceledGroup Management Main Group Management202 203 Create a Group204 Delete a GroupSelect a group and click on OK View Group and Printer205 Clickbar. on View Group on the TaskDisplay the printer properties page or 206Printer status 207 Add a Printer to a Group208 Remove a Printer from a GroupRemove from the list 209 NetPanel Setting Main Netpanel Setting210 Change the Administrator Password Administrator Setting211 212 WNP Setting213 Discovery Setting214 215 MAPMAP Password for MAP216 217 Install MAPClick on a language of your Operating System 218 Click on MAP setup219 Select Programs from Start menu Click on MAP Setup in the Map folderStart MAP 220221 Network Administrator page is DisplayedEnter http//xxx.xxx.xxx.xxx/ at Network Administrator page is222 Run the WWW Browser223 Select Setup NetWare from Network AdministratorEnter each field that applies Click on Accept Setting Enter the password224 225 Select Setup AppleTalk from Network AdministratorDisplayed Network Interface Card is automatically restarted Factory defaults are restored Restart the printer Restore Factory DefaultsClick on Factory Defaults Enter the password and click on Restore Factory Defaults227 Troubleshooting228 Netpanel Error229 Error messages230 231 When Printing Cannot be Performed232 233 Specifications and Other Information234 Specifications of the UnitsDemo Test Print Sample235 236 Configuration237 NIC Status238 PCL Font List239 240 241 PS Font List242 243 Status Log244 Group Management List245 List of Internal PCL Fonts246 247 List of Internal PS Fonts248 E1-17089B Kanda NISHIKI-CHO, CHIYODA-KU, TOKYO, 101-8442, Japan