Toshiba GA-1031 manual WNP Setting, 212

WNP Setting

➀

➁

➂

➃

➄

➀BackGround Image

Select whether to enable or disable the display of the background image.

NOTE: It is set to “Enable” as a factory default.

➁Refresh Rate (Seconds)

Enter the rate (in seconds) that NetPanel should wait before it updates the page. If the page refresh rate is set to "0", then Netpanel will not automatically update the page. You can set the range from 60 to 300 seconds.

NOTE: It is set to “0” as a factory default. If this is set to a number other than 0, the [Refresh Status] button on the System Properties Page, Connection Properties Page, and Status Diagnose Page disappears.

➂How Many Printers showed per page

Enter the number of the printers to be displayed per page. This must be greater than “0”.

NOTE: It is set to “10” as a factory default.

➃New Window for Help Document

Select whether to enable or disable the display of the help contents in a new window or within the same frame. NOTE: It is set to “Enable” as a factory default.

➄[OK]

Click this to save changes.

212