Toshiba GA-1031 manual Output Bin Properties, 180

Output Bin Properties

After you modify the settings, please perform a "Printer Reset to PowerOn" to enable the new

settings.

➀

➁

➂

➃

➄

➀Select Default Output Bin

Select the default Output Bin.

➁Select Offset Stacker Mode

Select ON when the Offset Stacker function is used for printing. This is available only when the Offset Stacker is installed. If not, a “Module not installed” message is displayed.

➂Select Duplex Mode

Select ON when the Duplex function is used for printing. This is available only when the Duplex Unit is installed. If not, a “Module not installed” message is displayed.

➃Device Password

The device password is required to save changes. The device password is automatically entered in the field.

➄[Change Now!]

Click on this to save changes.

180