17 Completeitem. the field of each required [IP Address]

Input the IP address of the printer. [Name]

Input the printer name you desire. The port name is name input here.

[Port]

In most cases, this does not need to be set. Input the value obtained by adding 1 (one) to the “Base Port Number” in the NetPanel “NIC Configure - IP Configuration.”

[Description]

If necessary, input a comment about the printer.

18

Click on [Add].

If an addition has been made by mistake, click

 

on the added printer then click on [Delete].

19

The printer is added to the [Available

Printers] list.

20

Click on [OK].

21

Click on [OK].

The completion message is displayed.

22

Click on the [OK].

23

Next, installing the printer driver:

For installing the printer driver, see

“INSTALLING THE PRINTER DRIVER for Windows” on later pages.

SUPPLEMENTS:

After the peer-to-peer utility for TCP/IP is installed, please continue the operation for installing the printer driver.

The “IP-P2P” program group and icon are added to the Start Menu. You can re- configure using the program.

If you make a change in the "Print Names" section, upon closing the program, it prompts you to reboot the computer. Click on [OK] and restart your computer.

UTILITY

PEER-TO-PEER

USING WITH

35

Page 37
Image 37
Toshiba GA-1031 manual Click on Add, Printer is added to the Available, Printers list, Click on OK, Click on the OK