Toshiba GA-1031 manual Select the Driver, 144, Click on the Apple menu, and select Chooser

Select “e-STUDIO16_20_25.PPD”, and click on [Select].

● The printer is created on the desktop.

● If other options are installed on the machine, the screen in Step 3 at “Option Setup” is displayed. In this case, continue the operation.

6

● “Select a PostScript Printer Description File” appears.

list, and click on [Create].

Select this machine from the printer

4 Select “LaserWriter8”.

● The printer list appears in “Select a PostScript Printer”.

5

● This appears only when several zones exist on the same network.

● Please ask an administrator which zone the printer is a part of

Select the Driver

Select the e-STUDIO16/20/25 from the Chooser.

SUPPLEMENTS:

●Your computer must be connected to the network via Ethernet. And “Ethernet” must be selected for “Connect via” in the AppleTalk SETUP.

●If the network has not been set yet, it should be set in [AppleTalk], [File Sharing], [Users

&Groups], and so on.

●In order to print through AppleTalk, the machine must be set to enable the AppleTalk protocol. See “NETWORK SETUP - APPLETALK”.

1Click on the [Apple] menu, and select [Chooser].

●“Chooser” appears.

2Make sure that “Active” is selected for “AppleTalk”.

●If “Inactive” is selected for “AppleTalk”, please

click on “Active”.

●If “Active” is selected for “AppleTalk”, but no

other Macintosh on the network is displayed, please confirm that the network cable is connected and set properly.

3 Select a zone that this machine belongs to from “AppleTalk Zone”.

144