Toshiba GA-1031 manual 183

➁I/O Timeout

This sets the time interval that the printer will wait if a print job is interrupted. The Auto Continue setting determines what to do with the interrupted print job.

NOTE: It is set to “45” as a factory default.

➂Page Protection Mode

A data overrun may occur during the printing operation when there is a large amount print data on a page. The printer can not process the data in time and therefore stops printing. In order to avoid data overrun errors, page protection reserves additional memory for page processing and will wait until the page is fully composed before printing the page.

● Auto	The printer analyzes each page and turns on page protection automatically only when it is required.
● On	The printer always keeps sufficient memory reserved to ensure that a page can be fully composed.

➃Smoothing Mode

This allows the smoothing feature to be used when printing. (This only applies when printing is performed without the printer driver.)

NOTE: It is set to “On” as a factory default.

➄Toner Save Mode

This sets the toner save feature to be used when printing. This only applies when printing is performed without the printer driver.

NOTE: It is set to “Off” as a factory default.

➅Auto Continue Timeout

This sets the duration that the printer will attempt to self-recover from printer or print job errors. NOTE: It is set to “15” as a factory default.

➆Detect Paper Size

This detects the paper size error before printing unless the paper size in the tray is matched to the document size. When this is set to OFF, the machine does not display the paper size error message and prints the document. When this is set to ON, the machine displays the paper size error message before printing the document if it does not match the paper size in the tray.

NOTE: It is set to “OFF” as a factory default.

➇Resolution

This sets the resolution for printing.

NOTE: It is set at “600dpi” as a factory default.

●600dpi

Select this to print documents with an emphasis on resolution over speed.

●300dpi

Select this to print draft-like documents or documents with an emphasis on speed over resolution.

FUNCTION NETPANEL

183