Toshiba GA-1031 Setup in Bindery Mode, Confirmation before setting up, Confirm Bindery Context

SETUP IN BINDERY MODE

The print server is set up in the bindery mode of NetWare 4.x. It is set in the bindery mode when you want to preserve the environment of the existing NetWare 3.x or to allow clients of NetWare 3.x to use the print server.

Confirmation before setting up

Before using the print server in the bindery mode, bindery context must be stored in the NetWare 4.x server. Check if bindery context exists there. For the bindery mode, refer to the Operator’s Manual for NetWare.

Confirm Bindery Context

To confirm that the server has a Bindery Context, perform the following steps by through the console prompt at the NetWare server.

1

2

3

4

5

Type load install and press Enter key.

Select NCF Files Options from the menu.

Select Edit AUTOEXEC.NCF from the menu.

View the screen to Edit AUTOEXEC.NCF file.

Search the file to see if you have a statement similar to the following included:

SET BINDERY CONTEXT=0U=ENG

●If the Bindery Context is “SET BINDERY CONTEXT=0U=ENG,” that means the server has a Bindery.

●When you do not have such a statement, add the statement and save it by pressing F10.

6	Press Alt+F10 to complete the confirmation.
	● If the new statement is added, the definition in the file takes effect when the server is shut down and then

restarted. If you want the Bindery Context applied frequently, type the new statement by the console prompt and press Enter.

66