Toshiba GA-1031 manual 173, ➁ Printer Configure, ➂ NIC Configure

➁[Printer Configure]

Click this to configure the local system properties, such as system location, input tray, output bin, paper, and system settings, for the selected printer.

After you modify the printer configuration, you must reset the printer to enable the settings.

[Refresh Status]

Click on this to update the status. This button is not available when the Refresh Rate is set at the WNP Setting on the NetPanel Setting.

General Properties

Configure the system location and contact.

Input Tray Properties

Select the default input tray.

Output Bin Properties

Select the default output bin and options.

Paper Properties

Set the default paper settings such as number of copies, default paper size, and duplex mode.

Printer Setting Properties

Set the default printing methods.

PCL Font Properties

Set the PCL settings such as orientation and PCL Font.

Group Management

Reset the group counter.

➂[NIC Configure]

Click on this to configure the NIC settings, such as enabled protocols, IP address, frame type and serial number of the NIC.

After you modify the NIC configuration, you must reset the printer to enable the settings.

Protocols Configuration

Select to enable or disable TCP/IP, IPX/SPX, and

AppleTalk.

IP Configuration

Assign the IP Address, Subnet Mask, and Default

Gateway.

Apple Talk Configuration

Set the printer name and the zone for AppleTalk.

System Configuration

Select the frame type and enter the Serial

Number of the NIC.

[Refresh Status]

Click on this to update the status. This button is not available when the Refresh Rate is set at the WNP Setting on the NetPanel Setting.

FUNCTION NETPANEL

173