Toshiba GA-1031 manual 230

Error Message Displayed	Action
Job Separator Upper Tray Paper Full	Remove the paper from the Job Separator Upper Tray.
Job Separator Lower Tray Paper Full	Remove the paper from the Job Separator Lower Tray.
Toner Empty	Please change the Toner.
Change Drum	Replace the Process Unit.
No Process Unit	Set the Process Unit.
Data Transfer Error on Network	Transfer again.
Examine Stapler	Examine Stapler.
Job too Complex	1. Print the data with lower resolution.
	2. Simplify the job.
	3. Add the optional memory.
Memory Overflow	1. Simplify the job.
	2. Add the optional memory.
Drum Life Out	Prepare a new drum cartridge.
Toner Low	Prepare a new toner cartridge.
Illegal Paper Size	Change the Paper size.
Load [paper size] in Cassette1	Load [paper size] size paper in Cassette 1.
Load [paper size] in Cassette2	Load [paper size] size paper in Cassette 2.
Load [paper size] in Cassette3	Load [paper size] size paper in Cassette 3.
Load [paper size] in Cassette4	Load [paper size] size paper in Cassette 4.
Load [paper size] in SFB	Load [paper size] size paper in SFB.
Load [paper size] in LCF	Load [paper size] size paper in LCF.
Load [paper size]	Load [paper size] in any cassette.
Data Existing	Select the form feed on front panel or wait for a
	while.
Initializing	Wait for a while.
Power Saving	-
Processing	-
Warming	Wait for a while.
Canceling Job	Wait for a while.
Printer Ready	-
Printing	-
Use By Another Job	Wait for a while.
Downloading Code	Don’t Power Off before complete. Please wait for
	a while.
Printer Power Off or Communication Error	1. Power on the printer.
	2. Check if the cable is connected properly.

230