Manuals / Toshiba / Computer Equipment / Printer

Toshiba GA-1031 manual Select the created printer and press, Printer Xxxxx configuration

Models: GA-1031

1 252

Download 252 pages 21.53 Kb

Page 73

Assigning the print queue

1	Select the created printer and press
1	the Enter key.
2	Printer XXXXX configuration (XXXXX
2	is the name of the printer created)
	appears.
3	Enter printer number at Printer No.
4	Highlight the Parallel at Printer Type
4	and press the Enter key.
5	Choose Other/Unknown from Printer
5	Type and press the Enter key.
6	Choose See list of Assign Print
6	Queues and press the Enter key.

7	NetWare Server\Print Queue appears.
8	Press the Insert key.

9 Select the created queue from Available Print Queues and press the Enter key.

●Up to 10 queues can be selected. When more than one queue is to be selected, the priority must be decided in advance.

WITH NetWare 4.x

PRINT SERVER

SETUP THE

71

Image 73

Toshiba GA-1031 Select the created printer and press, Printer Xxxxx configuration, Is the name of the printer created

Contents

Page FCC Notice Page Table of Contents Setup the Print Server with Windows NT4.0/2000 109 Installing the Printer Driver for WindowsReset a Printer and NIC 176 Print a Test 177 Troubleshooting Introduction Hardware RequirementsNetwork Requirements Others Example of connection on a peer-to-peer type network Example of connection on a client-server type networkSetup for Client Server Network for Windows Setup FlowFor Windows Setup for the Peer-to-Peer Type NetworkFor Macintosh Network Setup Supplement Assigning the IP AddressUse Dhcp Server Assigning the IP Address from the Control PanelStandby Mode, press Key Press Network setting is executingPress + on the Dial Keypad to select Complete Display returns to the TCP/IP menu Assign the IP Address ManuallyNetwork setting is executing Assigning the IP Address using MAP Click on your printer unit Click on Setup TCP/IPCheck off IP Address in Nvram Check on Enable TCP/IP and enter IP AddressComplete the IP Address setting Press On the Dial Keypad To select the Frame Type Novell SettingsFrame type on the Dial Keypad Press the numeric key of the desiredPress To select Auto Press to selectNetwork setting is executing Standby Mode, press Appletalk SettingPress + on the Dial Keypad to select Apple Talk If you want to cancel the AppleTalk setting Press Page Using with PEER-TO-PEER Utility Required Environment PEER-TO-PEER UtilitiesFor TCP/IP Protocol For IPX/SPX ProtocolInsertdrive. the CD-ROM into the CD-ROM InstallationClick on Next Installation Notes are displayed Click on Yes Click on IP P2P setupIs shown. It is the default port Files are installedClick on Next Field of Max Hops for, input aClick on Find Printers Click on Add Next, installing the printer driverPrinter is added to the Available Printers listINSTALLINGTHEPEER-TO-PEERUTILITY FORIPX/SPX Click on Next Click on IPX P2P setupMake sure the printer is displayed Under Available Printers Click on Next Files are installedMake sure the printer displayed under Available Printers shows S flagInstallation is completed Uninstalling the Peer-to-Peer Utility for TCP/IP Uninstallingthe PEER-TO-PEER UtilityClick on OK Restart the computer Uninstalling the Peer-to-Peer Utility for IPX/SPXClick on OK Click on Yes Setup the Print Server Set-up Example NetWare 3.x SetupSelect File Server Setting up with PconsoleCreating a print queue Creating the print server Print Server Setup Page Assigning a print queue Enter the priority and press the Enter Key Queue is assigned Available Queues appears Select a created queuePrint Server Setup Setting Up Notify Options for the Printer Preferred File Servers Primary File ServerAvailable File Servers list is displayed Press the Esc key to return to the menuPage Setup the Print Server Nwsrv Setup in NDS ModeStarting NetWare Administrator Setting up NetWare AdministratorAdministrator Start NetWare AdministratorPrinter Click on the container object to createCreate Print Queues appears Volume indicated by a in the figurePrint Queue Name Click on Browse of Print QueueCreating the printer Assigning the print queue Click on OK Printer is created Enter the name of the print server Create Print Server windowUnder Print Server Name Details of the created print serverClick on Assignments Allocating the printerPrint server is created Confirmation before setting up Setup in Bindery ModeConfirm Bindery Context Press Alt+F10 to complete the confirmationORG Starting Pconsole Creating the print server Print Server Information menu Choose the created print serverChoose Printer from the Print Server Information menu and press the EnterSelect the created printer and press Printer Xxxxx configurationIs the name of the printer created Enter printer number at Printer NoWhen Exit? appears, choose Yes and press the Enter key When Save Changes? appearsPress the Esc key twice Press the Esc key four timesProblems and press Enter key When a message appears, press the Enter keyStart the Pconsole utility Select Print Servers in the Available Option menuPage Setup the Print Server Setup in NDS Mode This is performed on the workstation Creating a print queue Enter the name of the print queue Click on Browse Print Queue VolumeUnder Print Queue Name Indicated by a in the figure atCreating the printer Assigning the print queue Click on OK Printer is created Create Print Server window Allocating the printer Supplements Page With Windows NT4.0/2000 Confirming the TCP/IP Print Services Preparation for Setting upCreating a Shared Printer Click on OK Click on Close To the list of Available ports IP address of the printer is addedAdd Printer Wizard Verify that the check box forSelect Windows 95 from the list Click on Next Check on Shared\ENGLISH\ESTUDIO\WIN9598\PCL6 Choose Yes or No as necessary, and click on FinishPrinter is created Log on to Windows 2000 as a user With Administrator or Power UserSelect Local printer When Using the TCP/IP PrintingSelect Create a new port and select Standard TCP/IP Port at TypeSelect Custom and click on Settings Enter PORT1 for the Queue Name Check on Snmp Status Enabled Enter 10001 at Port Number Check on Snmp Status EnabledSelect Raw or LPR under Protocol Drivers for Windows 2000/XP at Copy Click on OK Click on Next Click on Finish Click on Have Disk100 Printer is created 101102 When Using the IPPClick on OK Click on Have Disk 103 InstalledSelect the printer driver to be Printer is created 104Select the printer driver and select 105Sharing... from the File menu Click on Additional DriversInsert the printer driver CD-ROM Click on OK 106107 Click on OK Printer drivers are installed108 109 Installing the Printer DriverFeatures of Each Printer Driver Installing the Printer Driver110 111 112 Installation from the CD-ROMInsert the Printer kit CD-ROM into the CD-ROM drive 113 Click on the appropriate Setup forWindows Version Select the Group Number, and click114 SelectPaper. the Emulation and DefaultSelect the Peer-to-Peer Port, and click On Next Click on Browse 115Select the network printer and click on OK Enter the printer name, and click on Next 116117 Click on Finish Complete the installationSelect the Program Folder to be Created, and click on Next Windows 95/98/Me Installation by Adding Printer118 Select the network printer and click 119On OK Click on OK Select the printer to be used, and click on Next 120If necessary, change the Printer name, then click on Next 121Select to print a test page or not, then Windows NT4.0 Click on Start, select Settings, Then click on Printers122 Select how the printer is to be ControlledSelect the printer connected to 123Server, and click on OK Select the port added in the Peer-toInsert the CD-ROM included with 124Printer kit into the CD-ROM drive 125 126 Windows 2000/XPDouble-click on Add Printer to start Printer Wizard Next to browse for a printer then 127Server, and click on Next Click on Finish 128129 130 Copying the PageMaker PPD file131 Setting the Options ConfigurationClick on OK to save the settings Selectitems. the installed options for each132 Run the Uninstall.exe Uninstalling the Printer Driver133 After programs have been removed134 Install Agfa Font Manager135 Checkinstall. the components you want toClick on OK Click Finish 136137 Uninstall Agfa Font Manager138 Description of ScreenGetting Started with Agfa Font Manager 140 141 For Macintosh142 System RequirementSystem Requirements143 Copying the PPD File144 Select the DriverClick on the Apple menu, and select Chooser Make sure that Active is selected for AppleTalk145 Option SetupExit the Chooser 146147 Printer Specific OptionsPrinter Specific Options ➀ Offset Stack ➁ Toner Saving➃ Duplex 148➄ Media Type ➅ Edge Smoothing149 Printer Specific Options ➇ Resolution150 151 Netpanel Function152 Installing Netpanel153 InstallingClick on a language of your Operating 154 Click on Setup utilities Click on Netpanel setupEnter the IIS virtual directory 155Decide whether to read the Readme file at this time 156157 UninstallingClick on OK 158Required Environments Starting Netpanel159 160 Browsing with NetPanel161 Log162 Description of Screen➀ Logo ➁ Topic bar ➂ Task bar163 Using HelpClick on the Help button on Control bar Open the Window and display HelpFor the Normal User Operating Flow164 Log Printer Discovery165 For the AdministratorPrinter Management 166167 NetPanel SettingServer Management Group ManagementPrinter Discovery Main Printer Discovery168 169 Searching Result Display➀ System Properties ➁ Connection Properties 170➂ Status Diagnose ➃ Search Result ListPrinter Management Search Printer Management171 Printer Management Main ➀ Reset Printer172 ➂ NIC Configure ➁ Printer Configure173 ➄ Device Password ➃ Novell Configure174 175 Reset Printer and Test PrintClick on Reset Printer Now Operating result is displayed Reset a Printer and NIC176 Select the printer that you want toPrint a Test Clickbar. on Reset Printer on the Task Select desired test177 General Properties Printer Configure178 Input Tray Properties ➀ Select Default Input Tray179 ➁ Top Priority Cassette180 Output Bin PropertiesPaper Properties ➁ Default Paper Size181 ➀ Copies182 Printer Setting Properties➀ Lines Per 183 ➉ Print Postscript Error ➈ Emulation SettingDevice Password 184185 PCL Font Properties186 Group ManagementProtocols Configuration NIC Configure187 188 IP Configuration189 Apple Talk Configuration➀ Printer Name ➁ Zone Name190 System Configuration➀ Frame Type ➁ LPD Banner➂ Print on Startup 191➃ Type of Startup Novell Configuration Novell Configure192 Device Password Device Password193 Server Management Main Server Management194 ➀ Printers shared in Windows NT Server195 Server Management Main Page of Windows NT Server196 Install a Printer to a File Server197 Printer is installed to the FileServer 198 Remove a Printer from a File ServerSelect or specify the printer Click on Continue Printer is removed from the File 199200 Deleting Print Jobs201 Selected print jobs are canceledGroup Management Main Group Management202 203 Create a Group204 Delete a Group205 View Group and PrinterClickbar. on View Group on the Task Select a group and click on OKDisplay the printer properties page or 206Printer status 207 Add a Printer to a Group208 Remove a Printer from a GroupRemove from the list 209 NetPanel Setting Main Netpanel Setting210 Change the Administrator Password Administrator Setting211 212 WNP Setting213 Discovery Setting214 215 MAPMAP Password for MAP216 217 Install MAPClick on a language of your Operating System 218 Click on MAP setup219 Start MAP Click on MAP Setup in the Map folder220 Select Programs from Start menu221 Network Administrator page is Displayed222 Network Administrator page isRun the WWW Browser Enter http//xxx.xxx.xxx.xxx/ at223 Select Setup NetWare from Network AdministratorEnter each field that applies Click on Accept Setting Enter the password224 225 Select Setup AppleTalk from Network AdministratorDisplayed Network Interface Card is automatically restarted Click on Factory Defaults Restore Factory DefaultsEnter the password and click on Restore Factory Defaults Factory defaults are restored Restart the printer227 Troubleshooting228 Netpanel Error229 Error messages230 231 When Printing Cannot be Performed232 233 Specifications and Other Information234 Specifications of the UnitsDemo Test Print Sample235 236 Configuration237 NIC Status238 PCL Font List239 240 241 PS Font List242 243 Status Log244 Group Management List245 List of Internal PCL Fonts246 247 List of Internal PS Fonts248 E1-17089B Kanda NISHIKI-CHO, CHIYODA-KU, TOKYO, 101-8442, Japan