Windows NT PRINT SERVER SETUP

Create a shared printer on the Windows NT server so that clients can install the printer driver from Windows NT server and print a document through the Windows NT server.

When using Windows NT as the print server, utilize the Microsoft TCP/IP Printing services.

Preparation for Setting up

Check the following before set up:

The e-STUDIO16/20/25 and the computer are connected to the network.

The printer is powered up.

The printer has been configured with an IP address.

The TCP/IP protocol and Microsoft TCP/IP Printing Service are installed on Windows NT.

Confirming the TCP/IP Print Services

1

2

3

4

Click on [Start] and choose [Settings].

Choose [Control Panel].

Double-click on [Network].

Click on the Services tab.

5 Check that “Microsoft TCP/IP Printing” is displayed on Network Services. If not, install it.

For installation procedures, refer to the Operator’s Manual for Windows NT and Help.

88

Page 90
Image 90
Toshiba GA-1031 manual Preparation for Setting up, Confirming the TCP/IP Print Services