Step-by-Step Installation and Wiring
Step 1: Mount the SAM™ Bracket to Mounting Surface
WARNING: It is the installer’s responsibility to ensure that the mounting surface is stable and can support more than the speaker’s weight!
Use only industry-accepted fasteners and mounting methods when mounting the bracket. Consult an expert if you are not sure. Read steps 2 and 3 before attaching the speaker in step 4. For standard vertical installation mount the SAM™ bracket as shown in Figure 3. For horizontal mounting configurations, mounting the bracket on the bottom side (as in Figure 4) is easiest, allowing the speaker to be mounted closer to the ceiling.
Figure 3: Vertical Mounting | Figure 4: Horizontal Mounting |
70°
| 90° |
Figure 5: 70° Rotation Range | Figure 6: 90° Sweep Range |
Electro-Voice®Zx1i Owner’s Manual | 5 |
