Step 2: Select Voltage Tap (Zx1i-100T model only)
Before attaching the speaker to the bracket, select the proper voltage tap setting for your installation. The voltage selector switch is located at the rear of the speaker below the input terminal panel. The power taps are 100, 50, 25W and 12.5W at both 70.7V and 100V, with a 6W tap for 70.7V only. There is also an 8 ohm bypass setting. The taps are selected by a rotary switch on the back panel. A guide on the back of each speaker shows which switch positions to use for the power settings at 70V and 100V. Figure 7 below illustrates the settings.
Voltage Tap
Selector
Voltage Tap
Detail
Figure 7: Voltage Tap Selector (Zx1i-100T Model Only)
6 |
