B. Determine Lifter position and height setting
1. Set the Lifter Height Switch to the lowest setting.
| Handset Lifter Arm |
Lifter viewed | Start with Lifter |
from back | |
| Height Switch in |
| lowest position |
2. While wearing your headset slide the Handset Lifter Arm under the handset until the lifter base touches the side of the phone.
3.Slide the Lifter up to where it nearly touches the handset earpiece.
Slide Lifter under handset, then up toward the ear piece
4. Press the Call Control Button on the headset. This will activate the Handset Lifter and lift the handset from the phone.
If you hear a dial tone, the lifter height is set correctly and needs no adjustment. Press the Call Control Button to return the handset to the cradle. Please continue with section D “Mount the Lifter in permanent position” below. If you do not hear a dial tone continue with section C.
Call Control
Button
