Univex Wireless Headset System Use Configuration B if, HANDSET port or HEADSET port?

Use Configuration B if:

You will NOT use the Automatic Handset Lifter and…

Your phone has built-in headset functionality (a Headset button).

Configuration B

Confirm there is

a “HEADSET” button on your phone

C

1. Plug the short BLACK Phone Cable that is pre-installed on the Headset Base into the Headset port [C] on the desk phone.

Headset Base (bottom view)

HANDSET port or HEADSET port?

You should only use the headset port if you will NOT be using the Automatic Handset Lifter AND you have a pre-programmed Headset button on your phone.

In this configuration you MUST press both the Headset button on your phone AND the Call Control Button on the headset to answer/end calls.

Questions? For fast, efficient Technical Support call: 800-544-4660 Ext. 5538 5