HP 2500CM manual Reinsert, General Troubleshooting Tips, LCD Error Type Example Function, Xxxx

ROTATE, REINSERT	The printer has finished	Remove the stated number of
[NUMBER] PG TO	printing one side of a	pages from Tray 1, rotate the pages
TRAY [NUMBER]	2-sided document. The	and reload them into the specified
	pages need to be reloaded	tray, print side. Press to continue
	for printing to resume.	printing. You can set the printer to
		pick from Tray 1 by loading the paper
		into Tray 1 and pressing .
REINSERT	The printer has finished	Remove the stated number of pages
[NUMBER] PG TO	printing one side of a	from Tray 1 and reload them
TRAY [NUMBER]	2-sided document. The	into the specified tray, print side down.
	pages need to be reloaded	Press to continue printing. You can
	for printing to resume.	set the printer to pick from Tray 1 by
		loading the paper into Tray 1 and
		pressing .

HP 2500C/C+/CM Troubleshooting

This chapter documents the different troubleshooting tools and steps that can be used to assist you in diagnosing and solving most printer problems.

General Troubleshooting Tips

1.Check the printer LCD panel. If the printer LCD panel displays a Recoverable error message refer to Understanding Printer Messages for instructions on how to resolve the problem.

LCD Error Type	Example	Function
Recoverable	Offline,	Refer to Understanding Printer Messages
	INK LOW, etc.	for information on how to resolve such
		errors.
Non-Recoverable	ERROR CODE:	Your printer may have a hardware
	XXXX	problem. Turn off the printer wait for a
		few seconds and then turn it on again.
		If the message persists, call HP.

2.Check the LEDs on the printer. If the red LED is blinking, this means that the printer is in an error state or it requires attention. If both the LEDs are blinking, the printer is in a non-recoverable error state.

37