31
VQT1N74
[BEEP SOUND]
[LCD SET] (l34)
[COMPONENT OUT] (l86)
[HDMI RESOLUTION] (l85)
[VIERA Link] (l87)
[TVA SPECT] (l84)
[INITIAL SET]
[DEMO MODE]
∫[LANGUAGE] (l30)
Playback mode
([] motion picture playback)
∫[VIDEO SETUP]
[REPEATPLAY] (l70)
[RESUME PLAY] (l70)
[SCENE PROTECT] (l77)*2
[GUIDE LINES] (l53)
∫[EDIT SCENE]*2
[DIVIDE] (l76)
[DELETE] (l75)
∫[COPY]*2
(l79)
(l79)
∫[DISC SETUP]*3
[FORMATDISC] (l95)
[AUTO PROTECT] (l95)
[INFORMATION] (l95)
∫[SETUP]*4
[FORMATHDD] (l81)
[INFORMATION] (l81)
≥For any other menus that are not described
above, refer to menus with the same names for
the HDD recording mode/Card recording
mode.
([] still picture playback)
∫[PICT.SET UP]*2
[SCENE PROTECT] (l77)
[DPOF SET] (l78)*5
[DELETE] (l75)
∫[SETUP]
[FORMATDISC] (l95)*3
≥For any other menus that are not described
above, refer to menus with the same names for
the HDD recording mode/Card recording mode
and motion picture playback.
*1 This appears only when card recording mode
[ ] or card playback tab [ ] is selected.
*2 When the disc playback tab [ ] is
selected while a DVD burner (optional) is
connected, or when [INTEL. SCENE] (l70)
is selected, this does not appear.
*3 Only when the disc playback tab [ ] is
selected while a DVD burner (optional) is
connected, this appears.
*4 This appears only when the HDD playback
tab [ ] is selected.
*5 This appears only when the card playback
tab [ ] is selected.
This allows operations such as starting and
ending recording to be signaled by a beep.
1 Beep
When you start recording
When you turn on the power
When this unit is recognized by the PC or the
printer, etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps for 4 times
When an error occurs. Check the sentence
displayed on the screen. (l115)
Set to [YES] for changing the menu settings
back to the default condition.
(The language setting cannot be changed
back to the default condition.)
This item is used to start the unit
demonstration.
(Only when the mode dial is at the or
position)
If [DEMO MODE] is switched [ON] when there
is no SD card inserted and while this unit is
connected to the AC adaptor, the
demonstration automatically starts. If any
operation takes place, the demonstration is
canceled. However if no operations take place
for approx. 10 minutes, the demonstration
automatically starts again. To stop the
demonstration, set [DEMO MODE] to [OFF] or
insert an SD card.
HDCHS9P-VQT1N74_ENG.book 31 ページ ２００７年１２月２５日　火曜日　午後８時４３分