25
VQT1N74
Important:
While the DC cable is connected to the AC adaptor, the battery will not charge.
Do not use the AC cable with any other equipment as it is designed only for this unit. Do not
use the AC cable from other equipment with this unit.
1Connect the AC cable to the AC adaptor and the AC outlet.
2Connect the DC cable to the AC adaptor.
3Connect the DC cable to the DC input terminal [DC IN 9.3V].

Battery capacity indication

The display changes as the battery capacity reduces. ####.
If there is less than 3 minutes remaining, then will become red. If the battery discharges,
then ( ) will flash.
The remaining battery capacity is displayed in minutes when using the Panasonic battery that you
can use for this unit. It may take time to display the remaining battery capacity. The actual time can
vary depending on your actual use.
The maximum amount of remaining battery capacity able to be indicated is 999 minutes. If the
actual remaining time exceeds 999 minutes, the indication will stay green and will not change until
the remaining time falls below 999 minutes.
When turning the mode dial to switch modes, the time indication will turn off momentarily in order
to recalculate the remaining battery capacity time.
When using the AC adaptor or batteries made by other companies, the remaining battery capacity
will not be shown.

Connecting to the AC outlet

3
ADC output terminal
HDCHS9P-VQT1N74_ENG.book 25 ページ 2007年12月25日 火曜日 午後8時43分