Other linked operations, Turning the power off | Panasonic HDC-HS9P

≥If the TV has two or more HDMI input terminals, it is recommended to connect this unit to HDMI2 or HDMI3.

≥VIERA Link must be activated on the connected TV. (Read the operating instructions of the TV for how to set etc.)

≥If you are not using VIERA Link, set [VIERA Link] to [OFF].

∫Other linked operations

Turning the power off:

If you use the remote control for the TV to turn off the power, the power on this unit also turns off. (When recording motion pictures, formatting, deleting, recovering or connecting the unit to a PC with a USB cable, the power will not turn off.)

Automatic input switching:

If you connect with a HDMI mini cable and then turn on the power on this unit, the input channel on the TV automatically switches to this unit’s screen. If the TV’s power is in standby status, it will turn on automatically (if [Set] has been selected for the TV’s [Power on link] setting).

≥Depending on the HDMI terminal on the TV, the input channel may not switch automatically. In this case, use the remote control for the TV to switch the input channel. (For details on how to switch input, please read the operating instructions for the TV.)

≥If VIERA Link does not work properly, refer to page 124.

≥If you are unsure whether or not the TV and AV amplifier you are using are compatible with VIERA Link, read the operating instructions for the devices.

≥Available linked operations between this unit and a Panasonic TV is different depending on the types of Panasonic TVs even if they are compatible with VIERA Link. Refer to the operating instructions of the TV for the operations that support on the TV.

≥Operation is not possible with a cable that is not based on the HDMI standard. We recommend using Panasonic HDMI mini cables.

Part numbers: RP-CDHM15 (1.5 m/4.9 feet), RP-CDHM30 (3.0 m/9.8 feet)

88

VQT1N74

Image 88

Panasonic HDC-HS9PC operating instructions Other linked operations, Turning the power off, Automatic input switching

Contents

Model No. HDC-HS9P/PC Following mark and symbols are located on bottom of the unit Thank you for choosing Panasonic FCC Note Following Applies only in the U.S.AFollowing Applies only in Canada Battery pack Lithium ion battery pack Button-type battery Lithium batteryButton-type battery 60 oC 140 Battery pack For USA-California only Important Safety Instructions USE & Location Indemnity concerning recording contentCare Carefully observe copyright laws Cards that you can use with this unitFor the purposes of these operating instructions Licenses Contents Backup PlaybackWith a PC Others Accessories CD-ROM Features Very clear high definition picturesCompatibility with other products Standard images 720k480 Number of available scan lines Charging the battery Inserting/removing an SD card Card access lamp AccessQuick Guide Language selection Help mode To exit the Help modeRecording motion pictures Recording still pictures Motion picture playback Still picture playback Preparation Before using 1 Handlingdrive of HDD Hard disk Before using Parts identificationHandling LCD monitor open part LCD monitor l Remote control sensor l Recording lamp l Tripod receptacle Lens cover aLens hood Be careful about the following 26 27 36 38 Install a button-type battery supplied Remote controlWhile pressing the stopper A, pull out the battery holder Remote control usable range Power supply Charging the batteryAbout batteries that you can use with this unit Charging lamp Charge a Inserting/removing the battery Charging time Charging and recording timeRecording time Connecting to the AC outlet Battery capacity indication Setup 2 Preparation of SD cards Cards that you can use with this unitCard type Capacity Motion picture recording Still picture Sdhc Inserting/removing an SD card Set the mode dial to OFF. lSecurely close the SD card cover Selecting a mode Turning the power on and off with the LCD monitorTo turn on the power To turn off the power Turning the unit on/off Press the Menu button Setup 4 Using the menu screenPress the Menu button to exit the menu screen Language selection HDD Recording mode/ Card Recording modeMenu list PICT. SETUP*2 Playback mode Motion picture playbackEdit SCENE*2 Setting date and time Press the Menu button to finish the setting¬ Rotate the mode dial to select or Select the menu. l Select Destination and press the cursor button Select Home with the cursor buttonBasic # SET World Time # YES Setup 6 Adjusting LCD monitor Recording YourselfSelect the item with the cursor button Rotate the LCD monitor towards the lens side Recording Before recording Basic camera positioning Auto Ground-Directional Standby AGS About auto modeVideo # AGS # on Rotate the mode dial to select Or and open the LCD monitor Recording motion picturesPress the recording start/stop button to start recording About the compatibility of the recorded motion pictures Screen indications in the recording mode When motion picture recording stops suddenlyRecording mode Remaining time left for recording Recording time elapsed Recording modes/approximate recordable time HDD Close the LCD monitor while Mode dial is set to or Setup # Quick Start # onQuick start Open the LCD monitor Press the PRE-REC button Shooting guideAdvanced # Shooting Guide # on Focus indication Recording still picturesPress the button fully About the screen indications when the button is pressed About the focusing areaTo record still pictures clearly About the focus indication Picture # PICT.QUALITY # desired setting Picture qualityNumber of recordable pictures Card ¬Rotate the mode dial to select Zoom in/out functionDigital zoom function Zoom lever Optical image stabilizer button , O.I.S Image stabilizer functionS. Optical Image Stabilizer ¬Rotate the mode dial to select or Face detection & AE modeFace detection & AE button Operation icons Recording functionsOperation icons Intelligent contrast FadeControl Soft skin mode Self-timerMagicPix Backlight Help mode Soft skin modeSelf-timer Intelligent contrast control MenusRecording functions MenusGuide line 24p digital cinema Microphone setup Wind noise reduction Move the cursor button to adjust the microphone input level Microphone level HD hi-speed burst shooting Press the buttonSelect the range of pictures that will be stored Still pictures are recorded at a rate of 24 per second Red eye reduction Built-in flashPicture # RED EYE # on Zebra Shutter soundColor bar Digital cinema color Auto slow shutterAdvanced # Auto Slow Shtr # on Built-in flash Red eye reductionColor bar Auto slow shutter Set the AUTO/MANUAL/FOCUS switch to Manual Scene modeManual recording functions Manual focus adjustment Move the switch down and set it to Focus positionMove the cursor button to bring the subject into focus Advanced # MF Assist # on Indoor mode for recording under incandescent lamps Outdoor modeManual adjustment mode White balance Manual shutter speed/aperture adjustment Manual shutter speed adjustmentManual iris/gain adjustment Aperture Playback Rotate the mode dial to select Motion picture playback Towards r Speaker volume adjustmentTowards s Fast forward/rewind playback Skip playback To the start of a sceneSlow-motion playback Frame-by-frame playback Motion picture compatibility Playing back motion pictures by datePress the E or D button Video Setup # Repeat Play # on Video Setup # Resume Play # onIntelligent scene selection Repeat playback Still picture playback Still picture compatibility Playing back still pictures by date Select the still picture to be played back Deleting scenes/still pictures VQT1N74 Dividing a scene to delete Divide # Cancel ALLEdit Scene # Divide # SET Video Setup or PICT. SETUP# Scene Protect # YES PicturesProtecting scenes/still Editing 4 Dpof setting What is DPOF?Tab while the mode dial is set to Select the number of prints, then press the cursor button Copying between SD card HDDSelect the item and press the cursor button Select Video or Picture and press the cursor button Select the date to be copied and press the cursor button Select Start and press the cursor buttonApproximate time for copying To copy an 8 GB SD card with full motion pictures to a HDD SD card and HDD ManagementFormatting HDD information Watching Video/Pictures on Your TVConnect this unit to a TV With a TV Set the mode dial to to play back Cables Reference items To watch images with a 169 aspect ratio on a regular TV To display the on-screen information on the TV Connecting with a Hdmi mini cable Setup # Component OUT # desired setting Connecting with the component cableListening in 5.1 channel sound Playback using Viera Link Playback operation with the remote control for the TV¬Set the mode dial to Hdavi Control Automatic input switching Turning the power offOther linked operations Backup Connecting a DVD burner to Copy to/play back a discPreparing for copying/playing back New* 12 cm discs DVD-RAM, DVD-RW, DVD-R, DVD-R DL Copying to discs Insert the disc in the DVD burnerSelect Burn Disc and press the cursor button Select Play Disc and press the cursor button Select the date you want to copy and press the cursor button Important Notice About the approximate time it takes for copying to a disc Disc type Copy timeDVD-RAM/DVD-RW/DVD-R Approx min to 40 min Playing back the copied disc Formatting discs Copy to the disc. lTo release the disc protection Displaying disc information Video device Dubbing images onto other≥ Images are dubbed in standard quality With a printer PictBridge Connect this unit to a printer Select the paper size setting on Paper Size Press the Menu button to display the PictBridge menus With a PC 100 101 End User License Agreement 102 Operating environment Operating environment for HD Writer 2.5E for HDC103 CPU 104 Necessary softwareSound Interface Insert the CD-ROM into the PC Setup 1 Installation105 Check the contents, then close the window Click Finish Uninstalling HD Writer 2.5EPC must be rebooted for the application to work 106 Connection and recognition About the PC display Copying your still pictures toYour PC 108 Starting HD Writer 2.5E 109 If using Macintosh 110 Others 111 Recording indications 112 Playback indications 113 Confirmatory indications when a DVD burner is connected PC connection indicationsConfirmatory indications 114 115 This Battery Cannot be Used Push the Reset Switch116 Please Check External Drive or Disc About recovery 117 Functions that cannot be Used simultaneously118 PRE-REC 119 Troubleshooting 120 121 This unit cannot be operated though it is turned on 122 Auto focus function does not work 123 Viera Link does not 124Work When the scenes were recorded on different dates When more than 99 scenes were recorded on the same dateWhen scenes lasting under 3 seconds have been recorded When PRE-REC was used for recording When deleting scenes When the settings on the 24p digital cinema change126 127 Example 4 When edit assist is initiated by HD Writer 2.5E 128 When carrying the unit, do not drop or bump it CleaningWhen you are not going to use the unit for an extended time About this unit About the AC adaptor About the battery130 LCD monitor About condensationCauses of condensation 131 White balance adjustment Explanation of termsAutomatic white balance Auto focus Recording a subject behind dirty or dusty window 133Recording a subject with little contrast Specifications 134 135 USB Still pictures Recording media SD Memory Card 136DC output Optional accessories 137 Accessory Order Form For USA Customers 138 Request for Service Notice USA Only 139 Limited Warranty For USA Customers 140 Customer Services Directory 141 Warranty For Canadian Customers 142 Numerics Index143 144 Luz indicadora de acceso a la tarjeta Access Spanish Quick Use Guide/Guía española para el uso rápidoCarga de la batería Insertar/extraer una tarjeta SD Selección del idioma Modo de ayudaPara salir del modo de ayuda Grabación de películas Reproducción de fotografías Reproducción de películas147 Panasonic Puerto Rico, Inc