98
VQT1N74
To cancel the setting, set the number of prints
to [0].
Up to 8 files can be set in succession by
repeating steps 4 and 5.
6Press the MENU button to

display the PictBridge menus.

7Select the date print setting on

[DATE PRINT].

If the printer is not capable of date printing, this
setting is unavailable.
8Select the paper size setting on

[PAPER SIZE].

[STANDARD]: Size specific to the printer
[4k5 INCH]: L size
[5k7 INCH]: 2L size
[4k6 INCH]: Postcard size
[A4]: A4 size
You cannot set paper sizes not supported on
the printer.
9Select the desired layout setting

on [PAGE LAYOUT].

[STANDARD]: Layout specific to the printer
[ ]: No frame print
[]: Frame print
You cannot set page layouts not supported on
the printer.
10 Select [PRINT] # [YES] and

press the cursor button to print

the pictures.

Exit PictBridge by disconnecting the USB cable
(supplied) after the pictures have been printed.
When you stop printing halfway
Move the cursor button down.
A confirmation message appears. If [YES] is selected,
the number of prints set is canceled and the screen
returns to step4. If [NO] is selected, all the settings are
kept and the screen returns to step 4.
Avoid the following operations during printing.
These operations disable proper printing.
jDisconnecting the USB cable
jOpening the SD card cover and removing
the SD card
jSwitching the mode dial
jTurn the unit off
Check the settings for the paper size, print
quality etc. on the printer.
The print quality varies with paper size.
The edges of still pictures recorded in this unit
with a 16:9 aspect ratio may be cut off. When
using a printer with a trimming or borderless
printing function, cancel this function before
printing. (Refer to the operating instructions of
the printer for details.)
When the unit is connected directly to the
printer, the DPOF settings cannot be used.
Connect the printer directly to this unit. Do not
use a USB hub.
MENU
HDCHS9P-VQT1N74_ENG.book 98 ページ 2007年12月25日 火曜日 午後8時43分