Philips DMR-XS350EB operating instructions Troubleshooting Guide, To reset this unit

Troubleshooting Guide

When Other Panasonic Products Respond to this Remote Control

Use this function to synchronize the codes for the remote control and the main unit when there are other Panasonic products close to your unit.

With the unit stopped

Press [FUNCTION MENU].

Press [e, r] to select “Others”, then press [OK]. Press [e, r] to select “Setup”, then press [OK]. Press [e, r] to select “Others”, then press [OK].

Press [e, r] to select “Remote Control”, then press [OK].

Press [e, r] to select the code (“DVD 1”, “DVD 2” or “DVD 3”), then press [OK] to set.

While pressing and holding [OK],

press and hold the numbered button [1], [2] or [3] corresponding to the code set in step for more than 5 seconds to set.

8Press [OK] to complete.

When the following indicator appears on the unit’s display

–Change the code on the remote control to match the code displayed for the main unit (➔ step ).

Tips

To return to the previous screen

Press [BACK/RETURN].

To exit the screen

Press [EXIT].

To reset this unit

To reset the unit’s settings

All the settings except for the ratings level, PIN , Owner ID and Clock, etc. return to the factory preset. The timer recording programmes are also cancelled.

PIN for DVD-Video playback, Child Lock, Parental Control and VIERA CAST

On the main unit

Press and hold [2 CH] and [CH 1] for about 5 seconds.

–“freesat Auto Setup” (➔ 96) starts. To reset the unit’s settings by using the menu, see page 104.

To reset the ratings level settings

With the unit stopped

Press [; OPEN/CLOSE] to open the disc tray. Press [DRIVE SELECT] to select the DVD drive.

On the main unit

Press and hold [* REC] and [q/✕1.3] for about 5 seconds.

To restore the unit if it freezes

On the main unit

Press and hold [8] for more than 10 seconds.

– The unit is turned in standby.

To eject the disc forcibly

On the main unit

Press [8] to switch to standby mode.

–If the unit doesn’t switch to standby mode, restore the unit. (➔ above)

While the unit is turned in standby

Press and hold [g] and [CH 1] at the same time for about 5 seconds.

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart do not solve the problem, consult your dealer for instructions.

Updating to the latest software may solve the problem. (➔ 108)

The following does not indicate a problem with the unit:

•Regular disc rotating sound.

•Poor reception due to atmospheric conditions.

•Image disturbance during search.

•Periodic interruptions to the reception due to satellite broadcasting breaks.

•Operations are slow to respond when “Power Save” is set to “On”.

•Operations are not working due to a poor-quality disc. (Try again using a Panasonic disc.)

•The unit freezing due to the activation of one of its safety devices (➔ above, To restore the unit if it freezes).

•When the unit is turned on or off, there may be an unexpected sound.

Reference

119

RQT9431