Philips DMR-XS350EB After completing the connections, proceed to the TV Tuning, Hdmi features

BWhen your television has a digital satellite tuner

TV

STEP 2

Satellite HDMI IN AV

Connecting with a Panasonic TV (VIERA)

If the 21-pin Scart cable is

DISH IN 1

￿ To household		DISH IN 2
	AC IN
mains socket

HDMI

AV OUT

AV1 (TV)

connected, the Direct TV Recording and Pause Live TV function is available when you view other than satellite programme. (➔ 37)

Quick Start Guide

This unit	HDMI cable (not supplied)
	21-pin Scart cable (not supplied)

Connect only after all other connections are complete.

After completing the connections, proceed to the TV Tuning (➔ 13).

• Refer to page 116 if “U50”, “U50 1” or “U50 2” appears on the unit’s display.

HDMI features

•Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover).

•When outputting 1080p signal, please use the HDMI cables 5.0 meters or less.

•Set “HDMI Video Mode” and “HDMI Audio Output” to “On” (➔ 102). (The default setting is “On”.)

•This unit incorporates HDMI™ (V.1.3a with Deep Colour, x.v. Colour™) technology (➔ 134, 135).

•Video sources converted to 1920 × 1080 resolution, while of high quality, will exhibit somewhat lower subjective image resolution than true, native 1080p full-HD sources. See dealer for details.

Notes

•The freesat channel uses Astra 2 at 28.2° East, and Eurobird 1 at 28.5° East satellites. To ensure your satellite dish is correctly installed please consult your freesat registered dealer.

•If you connect 2 satellite dishes for different satellites (e.g., DISH IN 1: Astra 28.2, DISH IN 2: Astra 19.2), the unit cannot receive the signal correctly.

•You can use the unit as one tuner when connecting DISH IN 1 to a satellite dish that can receive SKY.

•If connecting to equipment that is only compatible with 2 channel audio output, audio with 3 channels or more will be down-mixed (➔ 134) and output as 2 channels, even if connecting with an HDMI cable (some discs cannot be down-mixed).

•For display units compatible with HDCP (High-Band width Digital Content Protection) that are equipped with a digital DVI input terminal (PC monitors, etc.):

Depending on the unit, picture may not display properly or at all when connecting with a DVI/HDMI switching cable (audio cannot be output).

•If you connect a DVI device that is not compatible with HDCP, set “HDCP on HDMI Output” in the Setup menu to “Off” (➔ 102).

Tips

You can check the satellite signal condition using “Signal Condition” in the Setup menu (➔ 96).

When the unit is not to be used for a long time

To save power, unplug it from the household mains socket. This unit consumes a small amount of power, even when it is turned in standby.

[approx. 0.4 W (“Power Save” is set to “On”)]

11

RQT9431