Philips DMR-XS350EB Media Disc/USB Memory/SD Card Handling, Inserting Discs, Disc and Card Care

Media (Disc/USB Memory/SD Card) Handling

Inserting Discs

1Press [; OPEN/CLOSE] to open the tray.

–Insert a disc.

	Cartridge disc
Insert label-up.	Insert label-up with the arrow
	facing in.

Insert fully.

Inserting/Removing the SD Card

When the card indicator (“SD”) on the unit’s display is flashing, the card is being read from or written to. Do not turn off the unit or remove the card.

Such action may result in malfunction or loss of the card’s contents.

•Inserting foreign objects can cause a malfunction.

Inserting the card

2Press [; OPEN/CLOSE] to close the tray.

Notes

•When using 8 cm DVD-RAM or 8 cm DVD-R, remove the disc from the cartridge.

•It is not possible to record or play continuously from one side of a double sided disc to the other. You will need to eject the disc and turn it over.

Automatic drive select function

RAM [Only for discs with the write-protect tab on the cartridge

Press on the centre of the card until it clicks into place.

Insert the card label up with the cut-off corner on the right.

If you are using a e.g., miniSD miniSD card, or a

microSD card, insert

it into the adaptor that	ADAPTER
comes with the card.
Insert and remove this
adaptor from the unit.

set to “PROTECT” (➔ 92, Setting Protection)]

DVD-V CD , MP3, JPEG, DivX

•If the unit is recording to the HDD or stopped, it automatically switches to the DVD drive when a disc is inserted.

•If you eject a disc and close the disc tray, the HDD drive is automatically selected.

Inserting/Removing the USB memory

Inserting the USB memory

When the USB indicator (“USB”) is flashing, the USB memory is being read from. Do not turn off the unit or remove the USB memory. Such action may result in malfunction or loss of the USB memory’s contents.

•Before inserting any USB memory to this unit, ensure that the data stored therein has been backed up.

•Check the orientation of the USB connector and insert it straight in.

•Insert a USB device while the unit is stopped, so the “USB device” screen is displayed. Select an item and press [OK] to switch to the USB-related operations (➔ 49, 66, 67, 68, 72, 75, 80).

Removing the USB memory

•Complete all USB-related operations and pull the USB memory straight out.

•If a USB memory being accessed is pulled out, then the data may be damaged.

118

Removing the card

1Press on the centre of the card.

2 Pull it straight out.

Automatic drive select function

•If you insert an SD card while the unit is stopped, the “SD Card” screen is displayed (➔ 66, 67, 68, 72).

•If you remove an SD card, the HDD drive is automatically selected.

Disc and Card Care

Holding a disc or card

Handle discs by the edges to avoid inadvertently scratching or getting oil from your fingers on the disc. Do not touch the signal surface of discs (the shiny side) or the terminal surface (the metal part) of SD cards.

Cleaning discs or cards

Discs are not indestructible and occasionally dirt or condensation may appear. Clean by gently wiping with a soft, dry lint-free cloth in a straight line from the centre of the disc to the edge of the disc. Return discs and SD cards to their cases when not in use; this helps to protect against scratches and dirt.

Storing discs and cards

•Do not place or store discs and cards in the following locations:

–Direct sunlight

–Very dusty or humid areas

–Near a heat source

–Places that undergo extreme shifts in temperature (condensation can occur)

–Where static electricity or electromagnetic waves occur

•Keep the Memory Card out of reach of children to prevent swallowing.

Discs to avoid

•Discs that are not perfectly circular in shape

•Warped discs, which may not balance properly in your unit, causing improper operation or damage to the unit

•Cracked discs

•Discs with exposed adhesive (from removed stickers or labels, such as may occur with rental discs or improperly cared-for discs that were previously labeled or re-labeled)

RQT9431