Philips DMR-XS350EB Software Update, Unit’s display during the update, 108, To start downloading

Software Update

Software of this unit can be updated automatically by following method.

•From broadcasts

•From Internet [network connection and setting is required. (➔ 106, 112)]

Update of the software is done when it is in standby mode. Once the new software is found, it will start the download of the software, and then update.

Download of the software will start automatically when the power of this unit is turned in standby or when it is 3 a.m.

•The time it takes to update depends on the connection.

–For Broadcast: About 1 hour. (It may change depending on the condition of the broadcast.)

–For Internet: About 1 hour (It may take longer than specified above to download because the download time differs depending on the network environment. It is recommended to be used in a broadband environment.)

If you do not want to perform the software update during the standby mode, set “Software Update in Standby” in the Setup menu to “Off”. (➔ 104)

If a software update is available, a notification is displayed

New software version has been found. The software will be updated automatically after the unit is switched to standby.

Do not disconnect the AC mains lead.

•Update of the software will start when the power is turned off.

To start downloading

Press [OK].

To ignore the new software

Press [EXIT].

The unit’s display during the update

• “SW-DL”	: Software is downloading. Download will stop
	when the power is turned on, or the timer
	recording starts.
• “START”	: Update of the software will start once the
	download is completed.
• “UPD /	” : Software is updating.

•“FINISH” : Updated of the software has completed.

You cannot operate the unit until the update is complete. Removing the AC mains lead while the update is in progress may damage the unit.

Notes

•If the timer recording is scheduled within the following time at the start of the download, the download will not be executed.

–For broadcast: Within 4 hours

–For Internet: Within 1 hour

•If downloading on this unit fails or this unit is not connected to the Internet, then you can download the latest software from the following website and burn it to a CD-R to update the software. http://panasonic.net/support/

108

RQT9431