Philips DMR-XS350EB operating instructions Remote Control Information/Unit Care, About batteries

Remote Control Information/Unit Care

Remote Control Information

About batteries

• Insert so the poles (4 and ) match those in the remote control.

R6/LR6, AA

•Use alkaline or manganese batteries.

•Do not mix old and new batteries.

•Do not use different types at the same time.

•Do not heat or expose to flame.

•Do not leave the batteries in an automobile exposed to direct sunlight for a long period of time with doors and windows closed.

•Do not take apart or short circuit.

•Do not attempt to recharge alkaline or manganese batteries.

•Do not use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.

Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

Using the remote control

Aim at the sensor, avoiding obstacles, up to a maximum range of 7 m directly in front of the unit.

Remote control signal sensor

20

30 20

30

Unit Care

The precision parts in this unit are readily affected by the environment, especially temperature, humidity, and dust. Cigarette smoke also can cause malfunction or breakdown.

To clean this unit, wipe with a soft, dry cloth.

•Never use alcohol, paint thinner or benzine to clean this unit.

•Before using chemically treated cloth, carefully read the instructions that came with the cloth.

Observe the following points to ensure continued listening and viewing pleasure.

Dust and dirt may adhere to the unit’s lens over time, making it impossible to record or play discs.

Use the Lens cleaner (not included) about once every year, depending on frequency of use and the operating environment. Carefully read the lens cleaner’s instructions before use.

Lens cleaner: RP-CL720E

Do not place the unit on	DO NOT
amplifiers or equipment that may
become hot.

The heat can damage the unit.

Select a position with good ventilation when installing the unit. Do not block the cooling fan on the rear of the unit.

Before moving the unit, ensure the disc tray is empty. Failure to do so will risk severely damaging the disc and the unit.

The manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited material due to a problem with the unit or recordable media, and accepts no responsibility and offers no compensation for any subsequent damage caused by such loss.

Examples of causes of such losses are

•A disc copied and edited with this unit is played in a DVD Recorder or computer disc drive manufactured by another company.

•A disc used as described above and then played again in this unit.

•A disc recorded and edited with a DVD Recorder or computer disc drive manufactured by another company is played in this unit.

7

RQT9431