Pioneer VSX-C100-S Loading the Batteries, Operating Range Remote Control Unit

Models: VSX-C100-S VSX-C100

1 60
Download 60 pages 61.05 Kb
Page 12
Image 12

Introductory Information

Loading the Batteries

The remote control operates on two AA batteries (supplied).

1

2

3

CAUTION:

Incorrect use of batteries may result in such hazards as leakage and bursting. Observe the following precautions:

Never use new and old batteries together.

Insert the plus and minus sides of the batteries properly according to the marks in the battery case.

Batteries of the same shape may have different voltages. Do not use different batteries together.

When disposing of used batteries, please comply with governmental regulations or environmental public institution’s rules that apply in your country or area.

Operating Range of the

Remote Control Unit

The remote control may not work properly if:

There are obstacles between the remote control and the receiver's remote sensor.

Direct sunlight or fluorescent light is shining onto the remote sensor.

The receiver is located near a device that is emitting infrared rays.

The receiver is operated simultaneously with another infrared remote control unit.

Maintenance of External Surfaces

Use a polishing cloth or dry cloth to wipe off dust and dirt.

When the surfaces are dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water, and wrung out well, and then wipe again with a dry cloth. Do not use furniture wax or cleansers.

Never use thinners, benzine, insecticide sprays or other chemicals on or near this unit, since these will corrode the surfaces.

30

30

7m (23 feet)

12

En

Page 12
Image 12
Pioneer VSX-C100-S Loading the Batteries, Operating Range Remote Control Unit, Maintenance of External Surfaces