Pioneer VSX-C100 Input Signal Select, Resetting the System, Sleep Function, Using Other Functions

Using Other Functions

Input Signal Select

This button selects the type of input signal, ANALOG, DIGITAL or AUTO, sent to the receiver. You need to take special care to switch to the appropriate input when necessary. For example, the switch would have to be on DIGITAL to hear Dolby Digital or DTS surround sound material but it would have to be on analog to record from the ANALOG out jacks on the receiver. The default setting is AUTO which chooses digital over analog when both are available but goes with whatever is available if it is the only choice.

	RECEIVER			SOURCE
1	SIGNAL SELECT
				SLEEP
	DVD	TV/SAT	FRONT	DIMMER
	DVR/ VCR	FM / AM
	AUTO	SURROUND ADVANCED		SOUND
				MODE
	SETUP	TEST TONE	CH_SELECT	ROOM
				SETUP

ENTER

MUTE

MASTER

VOLUME

1Use the SLEEP button to cycle through the three sleep time lengths (90 min., 60 min., and 30 min.) and set the sleep timer.

SLEEP indicator

•When the SLEEP timer has been set, or is active, a dot indicator will appear in the display (to the left of the volume indicator).

•Press the SLEEP button once to view how much time is left on the timer before shutdown. Each press after that will cycle through the possible SLEEP time lengths.

		Resetting the System
1 Use the SIGNAL SELECT button to cycle		Use this feature to reset the system to its factory default
through the three input modes.
		settings.
SEL. AUTO	SEL. ANA		AUDIO/ VIDEO MULTI-CHANNEL RECEIVER VSX-C100
			MASTER
SEL. DIG			VOLUME
			DVD TV/SAT DVR/VCR FM/AM FRONT
		URROUND MODE
		NES 2 ADVANCED	SOUND
		TUAL PRO LOGIC II	MODE	UP
			DOWN

•If there are no digital inputs (see p.14–17), the SIGNAL SELECT will default to AUTO.

•Set the SIGNAL SELECT to ANALOG if you want to use the receiver for karaoke.

11

1Press the TV/SAT button and the FRONT button at the same time for five seconds to return all of the settings to their default mode.

The SLEEP Function

Use this function to listen to the receiver and have it turn off at a specified time without you having to do anything. As is clear from the title this function is useful for drifting off to sleep while listening to music.

RECEIVER			SOURCE
SIGNAL SELECT				1
			SLEEP
DVD	TV/SAT	FRONT
			DIMMER
DVR/ VCR	FM / AM
AUTO	SURROUND ADVANCED		SOUND
			MODE
SETUP	TEST TONE	CH_SELECT	ROOM
			SETUP
			ENTER
MUTE

42

•If the receiver is disconnected from a power source for more than a month, or the main power is turned off, it will reset to the default settings.

•The above reset doesn’t affect the presets that you have programmed into the remote control (see page 45).

•The receiver resets to STANDBY.

En