Philips DMR-XS350EB To select Rec to HDD or Rec to DVD, then, Recording from a DV Camcorder

Recording from an External Device

Recording from a DV Camcorder

HDD RAM -R -RW(V) +R +RW

Preparation:

•Turn on this unit.

•If you record to a disc, insert a disc (➔ 118).

•RAM If the disc is protected, release protection (➔ 92).

•When the output signal from the external device is NTSC, change the “TV System” to “NTSC” in the Setup menu (➔ 101).

•This unit connects to DV camcorder with DV cable.

Turn on the DV equipment and pause play at the point you want to start recording.

The following screen appears.

DV Automatic Recording

Record from the DV unit?

Rec to HDD

Rec to DVD

OK

RETURN

When the screen does not appear

Perform step (➔ above).

1.Press [FUNCTION MENU].

2.Press [e, r] to select “Others”, then press [OK].

3.Press [e, r] to select “DV Automatic Recording”, then press

[OK].

You can proceed to step (➔ below).

e, r to select “Rec to HDD” or “Rec to DVD”, then

–It may take a while for the next screen to display while preparing to record.

to select the recording mode.

–DR, HG, HX, HE, HL, FR mode cannot be selected.

w to select “Start”, then

Notes

•Only one piece of DV equipment (e.g., Panasonic’s video camera, etc.) can be connected to the unit via the DV input terminal.

•It is not possible to operate the unit from the connected DV equipment.

•The DV input on this unit is for use with DV equipment only. (It cannot be connected to a computer, etc.)

•The DV equipment name may not be shown correctly.

•Depending on the DV equipment, the images or audio may not be input properly.

•Date and time information is not recorded, even if displayed on the DV camcorder.

•You cannot record and play simultaneously.

-RIt may not be able to record after repeating about 30 times of step or recording or editing.

-R-RW(V)After finalising, chapters for every 5 minutes will be created.

+R After finalising, chapters for every 8 minutes will be created. +RW Regardless of creating the top menu, chapters for every 8 minutes will be created.

Tips

When recording finishes

The confirmation screen appears.

Press [OK] to finish DV camcorder recording.

To stop recording

Press [■].

The confirmation screen appears. Press [OK].

If the DV camcorder recording function does not work properly, check the connections and DV equipment settings, and turn the unit off and

back on. If that does not work, follow the instructions on page 63.

64

RQT9431