Philips DMR-XS350EB operating instructions After performing step Previous, Programme, Recorded

Advanced Timer Recording HDD

Tips

•You can enter up to 32 programmes a month in advance. (Each daily, weekly or series timer recording is counted as one programme.)

To exit the timer recording list

Press [PROG/CHECK].

Notes

•Recording may fail if there are changes to the station’s programming.

•“z” disappears from the unit’s display when no timer programme is set or when all timer programmes are deactivated.

•“-------” is displayed on a series recording item if there will be no episode of the series for the next 8 days. We recommend you delete the “-------” item after you confirm the last episode of the series is recorded.

•The “Guide Link” function may not work if you manually change the start/end time by over 10 minutes.

•The “Guide Link” function may not work if you manually change the start time later or the stop time earlier than the original time.

•Programmes that failed to record are deleted from the timer recording list at 4 a.m. two days later.

To deactivate timer programme

(e.g. to interrupt a daily or weekly timer programming)

After performing step (➔ Previous page)

(Red)

–“z” on the timer recording list turns gray.

–Press the “Red” button again to activate timer programme.

Notes on timer recording

•Timer recording will not be performed if the clock is not set.

•During recording, timer recording standby or EXT LINK standby, this unit cannot play discs or titles that do not match the “TV System” setting. It is recommended “TV System” be set to match the discs or title before playing them. But to prevent the failure of the timer recording, change back the settings before the recording starts. (➔ 101)

•Timer recordings are activated regardless of whether the unit is turned on/in standby.

•Timer recordings begin when the set time is reached even when playing.

•Timer recordings do not begin while copying in normal speed mode.

•If the unit is turned on when timer recording begins, it remains turned on after recording finishes. It does not turn off automatically. You can turn the unit off during timer recording.

•When you programme successive timer recordings to start immediately one after the other, the unit cannot record the part at the beginning of the later programmes.

Programme	Programme
	Not recorded
Recorded	Recorded

•The “Overlapped Timer Recording” screen may be displayed immediately after you turn on this unit, if new overlapping occurred. Refer to “Check, Change, Delete Programmes, or Resolve Overlapping” (➔ 41).

42

RQT9431