Philips DMR-XS350EB operating instructions To change PIN 104, Owner ID, To set the clock manually

To check the signal condition (➔ 96, Signal Condition)

To tune in other satellite channels (➔ 16, Tuning in Other Satellite Services)

To hide unwanted channels (➔ 96, freesat Channel List)

To change PIN (➔ 104, Owner ID)

To correct the character

Press the “Red” button to delete character one by one.

You can delete all input characters by pressing the “Blue” button. You can perform this operation in step , or .

To display the Owner ID information on TV

Press and hold [g] on the main unit for more than 5 seconds. The PIN is not displayed.

After 30 seconds this menu automatically disappears. You cannot change the Owner ID on this screen.

You can perform this operation after step .

To set the clock manually

Normally this unit obtains time and date information from TV channels to set its clock and automatically adjusts the time several times a day.

If the clock is incorrect or cannot be automatically set, perhaps due to bad signal reception, you will need to adjust the clock manually.

•In the case of a power failure, the clock setting remains in memory for approximately 60 minutes.

1.Press [FUNCTION MENU].

2.Press [e, r] to select “Others”, then press [OK].

3.Press [e, r] to select “Setup”, then press [OK].

4.Press [e, r] to select “Others”, then press [OK].

5.Press [e, r] to select “Clock”, then press [OK].

6.Press [w, q] to select “Off” of “Auto Clock Setting”.

7.Press [e, r] to select “Manual Setting”, then press [OK].

8.Press [w, q] to select the item you want to change.

Hour Minute Second Day Month Year

9. Press [e, r] to change the setting.

10.Press [OK] to confirm new date and time and to initiate the clock.

Tips

To return to the previous screen

Press [BACK/RETURN].

To exit the screen

Press [EXIT].

Notes

If a TV station transmits a time setting signal, and when “Auto Clock Setting” in the Clock setting menu is set to “On”, the automatic time correction function checks the time and if necessary it is adjusted several times every day.

Quick Start Guide STEP 3

15

RQT9431