Philips DMR-XS350EB operating instructions Channel Settings

Channel Settings

freesat Channel List

You can set channel list of freesat.

1 Press [e, r] to select “freesat Channel List”, then press [OK].

freesat Channel List

115ITV3

116ITV3+1

117ITV4

118ITV4+1

120Channel 4

121Channel 4+1

122E4

Select

Hide

	Page UP
RETURN	Page Down CH

2 Press [e, r] to select the channel.

To hide unwanted channels

Press [OK]. The check mark disappears. You cannot select it by pressing [1, 2 CH].

(But you can select it by pressing the numbered buttons to enter the channel number directly.)

Press [OK] again to reveal.

freesat Auto Setup

You can restart auto setting for freesat channels if the setup

(➔ 13) fails for some reason.

However, if you perform “freesat Auto Setup”, all channel settings are deleted. Confirm the programme you set the timer recording after freesat Auto Setup. Please reset it if the setting information is not correct. Recordings on the HDD are not be deleted.

1Press [e, r] to select “freesat Auto Setup”, then press [OK]. When the confirmation screen appears

2Press [w] to select “Yes”, then press [OK].

Tips

•You can also use the following method to restart freesat Auto Setup. When the unit is turned on and stopped,

press and hold [1 CH] and [CH 2] on the main unit simultaneously for about 5 seconds.

– freesat Auto Setup screen appears.

Other Satellite Channel List

You can set channel list of other satellite services.

1Press [e, r] to select “Other Satellite Channel List”, then press [OK].

2Press [e, r] to select the channel.

•Press the “Red” button to delete the channel.

•Press the “Green” button to swap the channel. And, press the numbered buttons to enter the channel number you want to swap, then press [OK].

•Press the “Yellow” button to sort channels.

•Press the “Blue” button to profile the channel.

To hide unwanted channels

Press [OK]. The check mark disappears. You cannot select it by pressing [1, 2 CH].

(But you can select it by pressing the numbered buttons to enter the channel number directly.)

Press [OK] again to reveal.

Other Satellite Tuning Menu

You can tune channels from other satellites.

• Press [OK] to show the following settings.

Other Satellite Tuning Menu

Auto Setup	Access
Manual Tuning
Dish Setup

OK

RETURN

96

Auto Setup

You can start the auto setup of the other satellite services. (➔ 16, Tuning in Other Satellite Services)

Other Satellite Auto Setup - Satellite Selection

Satellite Selection	Astra2/Eurobird
Search Mode
	All
Channel Type
	All

freesat and other satellite channels

Select

Start

Change

RETURN

Manual Tuning

You can set the channel of the other satellite manually.

Other Satellite Manual Tuning

Transpounder Frequency 10773

PolarisationHorizontal

Symbol Rate (Ksym/s)					Auto
Start Scan	Se ect	0	-	9 Enter Frequency

RETURN

1Press [e, r] to select “Transpounder Frequency”

2Press the numbered buttons to enter the transpounder frequency.

3Press [e, r] to select “Polarisation”.

4Press [w, q] to select “Horizontal” or “Vertical”.

5Press [e, r] to select “Symbol Rate (Ksym/s)”.

6Press [w, q] to select the desired symbol rate, then press

[OK].

–The scan starts.

Dish Setup

You can set the dish setup manually.

Dish Setup

LNB Low Band Frequency (MHz) 9750

LNB High Band Frequency (MHz) 10600

22KHz Command On

Satellite services may not be available if changed!

Select

EXIT

0 - 9 Enter Frequency

RETURN

Reset all

1Press [e, r] to select “LNB Low Band Frequency (MHz)”.

2Press the numbered buttons to enter the LNB Low Band frequency.

3Press [e, r] to select “LNB High Band Frequency (MHz)”.

4Press the numbered buttons to enter LNB High Band frequency.

5Press [e, r] to select “22KHz Command”.

6Press [w, q] to select “On” or “Off”.

• Press the “Red” button to reset all settings.

Signal Condition

You can check the quality and strength of digital satellite broadcast signals. Realign the dish if you are receiving a poor signal.

1Press [e, r] to select “Signal Condition”, then press [OK].

2Press [w, q] to select the input you want to check.

Satellite Signal Condition

Dish Input			Input 1
Channel Name
			101 BBC 1 Wales
Signal Quality		0		10
Signal Strength		0		10
Network ID
			003B
Transport Stream ID
			07FF
Satellite Lock Indicator
			Not Locked
			Channel UP
					1
	Change Input		Channel Down		CH
					2
	RETURN

The quality and strength of the signal are shown. Press [1, 2 CH] to select the channel.

Signal Quality

Below 2 (display red)	The signal quality is so poor that there may
	be interference in the pictures and sound.
2–5 (display orange)	The signal quality is basically adequate, but
	brief interference in the pictures and sound
	is possible in isolated case.

Over 5 (display green) Optimum picture and sound quality.

RQT9431