Setting Up the VR101
Starting EventView 2
Viewing the Default Threshold Settings
The EventView program has
∙To see the default threshold settings on the Status tab, click the Default Setup button.
If you are concerned that some of your electronic equipment may have particular power quality requirements, we suggest that you call the equipment manufacturer for that information. You may discover that you should alter some of the recorder’s threshold settings in order to monitor power quality more closely.
Choosing and Saving New Default Threshold Settings
If the
1.Make your changes to the settings.
2.Click the Save as Default Setup button.
3.In the dialog box that appears, click OK to confirm that the default settings will be changed.
These settings are now saved in your computer and can be sent to any recorder that you communicate with by clicking Send Setup/Clear Recorder.
Choosing Operating Options
Stop Recording When Full or Overwrite Oldest Events When Full
A recorder can store 4,000 events. You can program it to either stop recording events or to continue recording when it is full and record over the oldest events in its memory.
∙Choose either Stop Recording When Full or Overwrite Oldest Events When Full.
Flash When Data Available
∙Check Flash When Data Available if you want the recorder to blink when it has stored one or more events (default condition).
15
