VR101S
Users Manual
Installing EventView software
1.Before installing EventView software, close other applications, or restart Windows.
2.For Windows 3.1, open Program Manager, select File from the menu bar and choose Run...
Windows 95/98/NT users select Start from the Taskbar on the desktop and choose Run...
3.Insert EventView Disk 1 of 2 in your computer’s disk drive. In the Run dialog box, type a:setup for drive A and press Enter (the Return key on some keyboards). If you are using drive B, type b:setup.
4.EventView supports several languages. If one of these languages has been specified in the Windows control panel, EventView uses the same language. If any other language is specified in Windows, the EventView setup procedure displays a language selection menu. Select the desired language.
During the following steps, change diskette as indicated.
5.A “Welcome!” dialog box will appear asking you to click Next if you want to start installing the EventView Software on your hard drive.
6.An information screen appears to inform you about some important items for installation and use of EventView Software. Read this carefully. Click Next.
7.Select the Destination Directory for the EventView Software. If you want to install the software in the default directory, click Next. If you prefer another directory, click Browse to select this directory, then click Next.
8.A dialog box appears asking if you would like to back up replaced files. It is a good idea to do so (select “Yes”.) Click Next.
8
