Manuals / Christie Digital Systems / Computer Equipment / Projector

Christie Digital Systems 38-DHD103-XX, 38-DSP104-XX Officially, Stacking Frame Installation

Models: 104-008101-XX 38-DSP106-XX 104-012101-XX 38-DSP104-XX 104-006101-XX 38-DHD106-XX 104-007101-XX 104-018101-XX 104-017101-XX 38-DHD103-XX 38-DSP102-XX

1 12

Download 12 pages 15.49 Kb

Page 3

Stacking Frame Installation Instructions

1. Stacking Frame Installation

WARNING

ALWAYS power down and unplug the projector prior to servicing.

Wait for the internal cooling fans to stop before unplugging the unit.

WARNING

	To avoid possible injury, a minimum of two
		RELEASED
	people are required to complete this procedure.
1.	Turn the projector OFF and disconnect the AC power cord after the cooling fans
	have stopped. Allow the projector to cool for at least 45 minutes.
2.	Place the projector into the stacking frame so the cut-outs in the bottom mounting
	plate of the frame align with the fold mirror and adjustable feet access points on the
	projector. Refer to Figure 2.	Control	2006

3.	Use a 10mm socket wrench to tighten the six (6) M10 bolts securing the mounting
	plate to the bottom of the projector. efer to Figu e 2.

Document	8,
OFFICIALLY
September

Figure 2. Projector Orientation for Stacking Frame Assembly

013-100342-01 (Rev.1) (08/06)

3 of 12 pages

Image 3

Christie Digital Systems 38-DHD103-XX, 38-DSP104-XX, 38-DSP106-XX, 38-DSP102-XX Officially, Stacking Frame Installation

Contents

Introduction Released Always use all rigging points Use metric hardware only. Never force incompatible threads Officially Stacking Frame Installation For inverted stack Place the proj Stack Projectors. Always follow Legs should fit inside the stacking mounts Key Points Hoisting Procedure Four Rigging Points Hoisting via Stacking Frame Handles Hoisting via Roadster/Mirage S+/Roadster HD12K Hardware REL EAS ED Projector Alignment Directional Adjustment Tilt Officially North America Technical Support