4
Wallbar installation
Remove the screw covers from the wallbar.
Position the wallbar in the desired location. Mark
the positions of the screw holes (1).
Place the wallbar in a safe location.
Drill the holes with a 6 mm bit (2).
Seal the wall around the anchors
with waterproof sealant.
Failure to seal the wall can lead
to possible water damage.
Do not drill into existing water
lines!
(3) Install the anchors.
Install the wallbar using the screws and washers.
Install the screw covers.
Install the soap dish (optional).
1 2
3