Lucent Technologies 7820-0802-003 manual Obtaining status information about a MultiDSP card

Configuring MultiDSP Cards (MAX TNT, APX 8000)

Obtaining status information about a MultiDSP card

A VoIP software license is required for MultiDSP support of the VoIP service. An additional software license is required for support of real-time fax functionality.

VoIP functionalities, including real-time fax, are configured through the MAX TNT VoIP profile.

For details about VoIP and MultiVoice configuration, refer to the MultiVoice for MAX TNT Configuration Guide. In addition, see “Configuring a MultiDSP card” on page 6-6.

Obtaining status information about a MultiDSP card

Information can be displayed about all installed cards or only an installed MultiDSP card.

Displaying information about all installed cards

The show command displays the following information about currently installed slot cards, including the MultiDSP card:

•Location of all installed cards by shelf number, slot number, and item or port number, including the MultiDSP card

•Status of each card (for example, if the card is Up or Down)

•Type of cards currently installed

Note: The 48-port MultiDSP card is displayed with the name madd or madd-card. The 96-port MultiDSP card is displayed with the name madd2-card.

Use the show command to confirm that the MultiDSP card is listed as one of the installed cards and is shown installed in the correct slot. For example, in a MAX TNT unit the command displays the following information if the unit has only one shelf (shelf 1) and a 96-port MultiDSP card is installed in slot 3:

admin> show

Shelf 1 ( standalone ):

{ shelf-1 slot-3 0 } UP madd2-card

Displaying information about an installed MultiDSP card

Use the show command with the MultiDSP card shelf number and slot number to display the following information about a particular installed MultiDSP card:

•The card’s ports by shelf number, slot number, and port number

•Status of each port (for example, whether the port is Up or Down)

•The port service type (for example, modem)

Enter the show command, along with the shelf number and port number, to confirm that all MultiDSP card ports are shown in the listing.

Note: For the 96-port MultiDSP card, the show shelf slot command displays

96modems (ports). For the 48-port card, only the odd-numbered modems (1, 3, ..., 95) are active. The modem -acommand verifies that only 48 modems are available on the 48-port card.

APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide 6-5