Lucent Technologies 7820-0802-003 manual Where to go next

Performing Basic Configuration

Where to go next

In the following example, commands enforce address security and specify a trusted address for read and write access:

admin> read snmp SNMP read

admin> list enabled = no read-community = public

read-write-community = write enforce-address-security = no

read-access-hosts = [ 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 ] write-access-hosts = [ 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 ] contact = ""

location = ""

admin> set enforce-address-security = yes

admin> set read-access 1 = 10.2.3.4

admin> set write-access 2 = 10.2.56.123

admin> write SNMP written

Where to go next

For APX 8000 units with two shelf controllers, proceed to Chapter 2 to configure shelf-controller redundancy. Then proceed to the appropriate chapters to configure slot cards for your unit.

For APX 8000 units with a single shelf controller and for MAX TNT and DSLTNT units, proceed to the appropriate chapters to configure slot cards for your unit.

1-12 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide