Lucent Technologies 7820-0802-003 manual OC3-ATM

modems

AT modem strings, configuring additional, 5-3configuring V.34 modulation, 5-3specifying negotiation settings, 5-2

modulation, configuring V.34 for 56K modem, 5-3

MP/MP+ calls

FrameLine card and, 8-2,10-2

multichannel calls

disrupted by forwarded dialed digits, 7-11FrameLine card and, 8-2,10-2

how they are dialed, 7-19

limited by trunk groups, 7-20,9-14reason for failing, 7-19

MultiDSL

ADSL overview, 17-2IDSL, 17-1

sample IDSL configuration, 17-22sample SDSL configuration, 17-29,17-34SDSL, 17-3

SDSL-HS,17-3

N

nailed channels configuring, 7-18,9-14HDLC resources and, 5-5

number must match on both ends, 7-21,9-15

nailed connections DSL, 17-5FrameLine card and, 8-2

nailed group

channels in, 7-21,9-15

example channel configuration, 7-21,9-16example T1 channel configuration, 9-16for E1channels, 9-4

for SDSL connection, 17-16,17-32,17-36for T1 channels, 7-5

FrameLine card and, 8-2specifying for serial WAN, 12-4

nailed-group

OC3-ATM physical interface parameter, 15-2name

assigning to E1 profile, 9-6assigning to SWAN profile, 12-4assigning to T1 profile, 7-7assigning to T3 profile, 11-4assigning to UDS3 profile, 13-2displayed in Line Status window, 7-7setting system, 1-5

NAS. See network access server (NAS) negotiation, specifying modem, 5-2NFAS signaling

configuring, 7-13

configuring multiple groups, 7-13

configuring single group, 7-13for T3 card, 11-2

multiple groups supported on T1/T3 card, 7-13

NVRAM clearing, 2-9

shelf-controller, clearing, 2-8

O

OC3-ATM

command configuration, 15-4OC3-ATM configuration, example, 15-4OC3-ATM interface

enable/disable parameter, 15-2OC3-ATM physical interface

nailed group parameter, 15-2OC3-ATM port

physical-address parameter, 15-2OC3-ATM ports as clock source, using, 15-3OC3-ATM profiles

supporting Clock-Source,15-3

OC3-ATM settings, overview, 15-1outbound calls

using trunk groups, 7-20,9-14

P

paramaters

loopback enable/disable, OC3-ATM,15-2parameter

System-IP-Addr,18-7parameters

cell payload descramble, DS3-ATM,14-3cell payload scramble, DS3-ATM,14-3Clock-Priority, OC3-ATM ports, 15-3Clock-Source,15-3

Clock-Source for OC3-ATM,15-3Clock-Source, OC3-ATM ports, 15-3

configuring E1 lines for signaling system 7 (SS7) data trunks, 18-10

continuity checks, 18-12DS3-ATM settings, 14-1enable/disable

DS3-ATM interface, 14-2Global-Call-ID, 18-20

nailed-group, DS3-ATM physical interface parameter, 14-2

OC3-ATM interface, enable/disable, 15-2OC3-ATM physical interface, nailed-group,15-2physical-address, OC3-ATM port, 15-2signaling interface, configuration, 18-5

T1 lines, signaling system 7 (SS7) configuration, 18-8

APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Index-7