Signaling System 7 (SS7)
Configuring an SS7 signaling gateway
Number of CONNECT to ASG: | 0 |
|
Number of CONNECT_ACK from ASG: | 0 |
|
Number of SETUP rejected from: | L3: 0 | CC: 0 |
Number of DISCONNECT requests from: | L2: 0 | CC: 0 |
Number of REGISTRATION to ASG: | 0 |
|
Number of REGISTRATION_ACK from ASG: | 0 |
|
Number of DL_REL_IND from L2: | 0 |
|
Number of DL_EST_IND from L2: | 0 |
|
Number of T303 expiry events: | 0 |
|
Number of T305 expiry events: | 0 |
|
Number of T308 expiry events: | 0 |
|
Last L3 counters reset timestamp: | [02/08/1999 18:47:41] | |
Data Transport Layer: |
|
|
Number of link | 0 |
|
Number of persistent errors: | 161 |
|
Last error: | Persistent Error | |
Last error status change timestamp: | [02/08/1999 18:47:41] | |
When the command reports no errors, the output contains the following fields:
Output field | Description |
Initialized successfully Indicates whether the SS7 layer between the TAOS unit and the signaling gateway has been successfully initialized.
Interface state
Diagnostic level
Number of SETUP requests from:
State of the SS7 interface. A value of Enabled/Up indicates that the Enabled parameter in the
The diagnostic level as specified with the
•0: Disable diagnostic output.
•1: Show errors only.
•2: Trace L3 events and states.
•3: Trace Call Control events.
•4: Show all task events.
•5: Dump L3 packets.
•6: Dump Call Control primitives.
L2: Number of setup requests from the signaling gateway (SS7 network) or from incoming calls.
CC:Number of times the TAOS unit tried to make an outgoing call to the signaling gateway (the SS7 network). Note that outgoing calls are not currently supported.
APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide |
