Signaling System 7 (SS7)
Cause codes for SS7 ASGCP calls to the TAOS unit
Number of T308 expiry events: | 0 |
Last L3 counters reset timestamp: | [02/16/1999 10:33:31] |
Data Transport Layer: |
|
Number of link | 0 |
Number of persistent errors: | 0 |
Last error: | No Error |
Last error status change timestamp: | [01/01/1990 00:00:00] |
When errors are detected, the command output displays the fields explained in the previous section plus the following additional information:
Output field
Number of memory allocation failures
Number of errors in profile operations
Number of invalid memory pointers
Number of internal errors
Number of errors in initialization
Memory pools
Mailboxes
Description
Number of times the TAOS unit could not allocate memory for packets traveling between call control and layer 3.
These errors might occur if the TAOS unit does not have a
Number of times the TAOS unit could not register the
Number of empty packets received by IPDC layer 3. Used for IPDC only.
Number of internal errors.
Number of errors that occurred during the initialization of the SS7 ASG interface.
Number of buffer pool allocations that failed.
Number of failures that occurred during the creation or operation of the mailboxes used for interlayer messaging.
Cause codes for SS7 ASGCP calls to the TAOS unit
The TAOS unit reports cause codes to the signaling gateway via ASGCP when it initiates a call clearing. The following ASGCP messages carry cause code information.
•Disconnect
•Release
•Release Complete
•Restart Acknowledgement (cause optional)
•Status
The TAOS unit currently reports the cause codes defined by
•The TAOS unit reports Normal call clearing (16) if a TAOS unit modem times out on a modem call.
APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide |
