Lucent Technologies 7820-0802-003 manual Verifying that MultiDSP services are enabled

Configuring MultiDSP Cards (MAX TNT, APX 8000)

Configuring a MultiDSP card

•Verifying that all other configurations associated with the MultiDSP services have been performed. For example, for VoIP MultiDSP support, all required configurations for VoIP, real-time fax (optional), and other desired MultiVoice features must also be performed.

•Adding support for an additional MultiDSP service, if necessary.

Verifying that MultiDSP services are enabled

The Base profile is a read-only, system-wide profile that displays enabled features, network interfaces, and system information. Included in the Base profile are the MultiDSP services. The Base profile indicates which MultiDSP services are currently enabled (licensed). Because the MultiDSP modem function does not require a software license, no modem-related parameter appears in the Base profile.

Display the Base Profile to verify that desired services are licensed on the unit. Use the get base command to view the profile.

The following Base profile parameters relevant to the MultiDSP card. Verify that the appropriate services are supported for your MultiDSP applications.

Base profile parameter	Value if supported
Data-Call-Enabled	Yes if the unit supports data calls over ISDN (digital) lines.
	The parameter is also used by Series56 and Hybrid Access
	(HDLC) cards.
R2-Signaling-Enabled	Yes for R2 signaling support.
SS7-ASG	Yes for ASGCP SS7 IMT signaling support.
XCOM-SS7	Yes for IPDC SS7 IMT signaling support.
V110-Enabled	Enabled if V.110 software is licensed on the unit.
PHS-Support	Yes if Personal Handyphone System PIAFS 1.0, PIAFS 2.0
	support is licensed on the unit. For PIAFS 2.1 support, the
	PHS-2-1-Support parameter must also be enabled by a
	software license.
PHS-2-1-Support	Yes if PIAFS 2.1 support is licensed on the unit. The
	PHS-Support parameter must also be enabled by a software
	license. (The two PHS licenses are also available bundled
	into one package.)
VoIP-Enabled	Yes if VoIP is enabled by a software license.
RTFax-Enabled	Yes if real-time fax (T.38) is licensed. For real-time fax
	support, the VoIP-Enabled parameter must also be enabled
	by a separate software license.

The following example shows relevant Base profile parameters and values for a unit installed with a 48-port MultiDSP card that supports modem calls, digital HDLC calls, and PHS PIAFS

1.0 and PIAFS 2.0 calls (but not PIAFS 2.1 calls):

admin> get base

...

data-call-enabled = yes

...

phs-2-1-support = no

APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide 6-7