Signaling System 7 (SS7)

 

 

SNMP support for SS7

 

 

 

Event

Code

Q.850 Definition

DIS_Q850_PROTOCOL_ERROR

911

Message with unrecognized

 

 

parameter was discarded

DIS_Q850_INTERWORKING_UNSPEC

927

Unspecified internetworking event

SNMP support for SS7

The SS7 MIB (mgstat.mib) is implemented as a branch object with the main object, mgGroup, linked into the Ascend enterprise MIB. For definitions and descriptions of objects, see the mgstat.mib file distributed with TAOS 8.0.2 software.

An SNMP trap is supported for reporting the status of the link between SS7 media gateways and the TAOS unit. The trap can be configured when an SS7 license is enabled. For a trap to be generated when the trap condition occurs, SNMP traps must be enabled and the setting for the trap condition must be enabled. For details about enabling traps, see the APX 8000/MAX TNT/DSLTNT Administration Guide.

The following trap has been added to the Ascend enterprise traps:

megacoLinkStatusTrap

TRAP-TYPE

ENTERPRISE

ascend

VARIABLES

{ mgLinkName, mgOperStatus }

DESCRIPTION

"This trap indicates that operational status

 

of a media gateway control link has changed."

::= 42

 

Following is the relevant parameter in the Trap profile, shown with its default value, for enabling the trap:

[in TRAP/""]

megaco-link-status-enabled = no

Parameter

Megaco-Link-Status- Enabled

Specifies

Enable/disable trap generation of communication link status between the SS7 media gateway and the TAOS unit. This trap indicates that operational status of a media gateway control link has changed from any state to the Up state or from Up state to any other state. Changes to this parameter become effective when you write the Trap profile.

The trap contains the name of the link, which is currently always reported as default, and the new operational status.

For example, the following commands enable the SS7 link-state trap:

admin> read trap example TRAP/example read

admin> set megaco-link-status-enabled = yes

admin> write TRAP/example written

APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide

18-23

Page 213
Image 213
Lucent Technologies 7820-0802-003 manual Snmp support for SS7, Event Code Definition