Lucent Technologies 7820-0802-003 manual Configuring the DSLPipe

Configuring DSL Connections (DSLTNT)

Sample DSL configurations

6Verify that IP routing is enabled (the default) for this Connection profile: admin> set ip-routing-enabled = yes

7Verify that VJ header prediction is not enabled for this Connection profile: admin> set vj-header-prediction = no

8List the PPP-Options submenu: admin> list .. ppp-options

[in CONNECTION/dslpipe:ppp-options] send-auth-mode = no-ppp-auth send-password = "" recv-password = "" link-compression = stac

mru = 1524 lqm = no

lqm-minimum-period = 600 lqm-maximum-period = 600 split-code-dot-user-enabled = no

9Specify the authentication mode that the DSLTNT requests for the outgoing call: admin> set send-auth-mode = pap-ppp-auth

10Specify the password that the DSLTNT sends to the DSLPipe: admin> set send-password = pap

11Specify the password that the DSLTNT expects to receive from the DSLPipe: admin> set recv-password = pap

12List the Telco-Options submenu: admin> list .. telco-options

[in CONNECTION/dslpipe:telco-options] answer-originate = ans-and-orig callback = no

call-type = off nailed-groups = 1 ft1-caller = no force-56kbps = no data-service = 56k-clear

..

..

13Specify the call type:

admin> set call-type= ft1

14Specify the nailed group to use for this Connection profile: admin> set nailed-groups = 73

15Write the profile: admin> write

Configuring the DSLPipe

To configure the DSLPipe in this example:

1From the Main Edit menu, select Configure.

17-28 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide